A6280, A6281, A6281EESTR Selling Leads, Datasheet
MFG:MMI Package Cooled:QFN D/C:07+
A6280, A6281, A6281EESTR Datasheet download

Part Number: A6280
MFG: MMI
Package Cooled: QFN
D/C: 07+
MFG:MMI Package Cooled:QFN D/C:07+
A6280, A6281, A6281EESTR Datasheet download

MFG: MMI
Package Cooled: QFN
D/C: 07+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: A6280EA-T
File Size: 411599 KB
Manufacturer: ALLEGRO
Download : Click here to Download
PDF/DataSheet Download
Datasheet: A623308
File Size: 134007 KB
Manufacturer: AMICC [AMIC Technology]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: A623308
File Size: 134007 KB
Manufacturer: AMICC [AMIC Technology]
Download : Click here to Download
The A6280 is a 3 bit constant current LED driver that has a wide range of output currents. The A6280 controls LED luminance with a pulse width modulation (PWM) scheme that gives the application the capability of displaying a billion colors. The overall maximum current is set by an external resistor.
The LED luminance is controlled by performing PWM control on the outputs. The luminance data of the PWM signal for each LED is stored in three 10 bit registers. Each LED can be dot corrected by a 7 bit scalar register that scales the maximum current from 100% down to 36.5%. All the internal latched registers are loaded by a 31 bit serial shift register. One bit is used to control the type of data loaded into the registers, either dot correction / clock divider ratio or luminance data. The remaining 30 bits are used for the data. This helps reduce the pin count of the A6280. To further lower the A6280 pin count, the PWM clock and the serial bus clock share the same pin and work concurrently to control LED luminance and to load data.
The A6280 is designed to minimize the number of components needed to drive LEDs with large pixel spacing. Several A6280s can be daisy chained together and controlled by just four control signals (Clock, Serial Data, Latch, and Output Enable). Each of these inputs has buffered outputs on chip. Also, the VIN pin can be tied to the LED voltage supply bus, thus eliminating the need for a separate chip supply bus or an external linear regulator. The A6280 is supplied in a 16 pin dual in line (DIP) package (suffix 'A') package and in a 16 lead QFN/MLP (suffix 'ES') package.
The packages are lead (Pb) free with 100% matte-tin leadframe plating.
| Characteristic | Symbol | Notes | Rating | Units |
| Supply Voltage | VIN | 17 | V | |
| Output Voltage | VO | 0.5 to 17 | V | |
| Output Current | IO | 170 | mA | |
| Ground Current | IGND | 600 | mA | |
| Logic Input Voltage Range | VI | 0.3 to 7 | V | |
| Operating Ambient Temperature | TA | Range E | 40 to 85 | °C |
| Maximum Junction Temperature | TJ(max) | 150 | °C | |
| Storage Temperature | Tstg | 40 to 150 | °C |
The A6281 is a 3-channel constant current LED driver that has a wide range of output currents. The A6281 controls LED brightness with a Pulse Width Modulation (PWM) scheme that gives the application the capability of displaying a billion colors in an RGB cluster. The maximum current is set by an external resistor.
The LED brightness is controlled by performing PWM control on the outputs. The brightness data of the PWM signal for each LED is stored in three 10-bit registers. The peak value for each LED can be adjusted (dot-corrected) to compensate for mismatch, aging, and temperature effects. All the internal latched registers are loaded by a 32-bit shift register. One address bit controls whether dot correction/clock divider ratio or brightness data is loaded into the registers. The remaining bits are used for the data.
The A6281 is designed to minimize the number of components needed to drive LEDs with large pixel spacing. A large number of A6281s can be daisy chained together and controlled by just four control signals (clock, serial data, latch, and output enable). Each of these inputs is buffered to drive the next chip in the chain. Also, VIN can be tied to the LED voltage supply bus, thus eliminating the need for a separate chip supply bus or an external regulator.
The A6281 is supplied in a 3 mm 3 mm 16-terminal QFN (suffix S? package, with 0.75 mm nominal overall height. The package is lead (Pb) free with 100% matte-tin leadframe plating.
