APW7058, APW7058AF, APW7060KC-TR Selling Leads, Datasheet
MFG:ANPEC Package Cooled:SOP-8 D/C:SOP
APW7058, APW7058AF, APW7060KC-TR Datasheet download
Part Number: APW7058
MFG: ANPEC
Package Cooled: SOP-8
D/C: SOP
MFG:ANPEC Package Cooled:SOP-8 D/C:SOP
APW7058, APW7058AF, APW7060KC-TR Datasheet download
MFG: ANPEC
Package Cooled: SOP-8
D/C: SOP
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: APW7058
File Size: 547529 KB
Manufacturer: ANPEC
Download : Click here to Download
PDF/DataSheet Download
Datasheet: APW1175
File Size: 253346 KB
Manufacturer: ANPEC [Anpec Electronics Coropration]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: APW7060KC-TR
File Size: 183718 KB
Manufacturer: ANPEC [Anpec Electronics Coropration]
Download : Click here to Download
The APW7058 integrates one synchronous-rectified Buck PWM controller and one linear controller to provide two regulated voltages for graphics cards and other embedded processor applications. The PWM controller which drives dual N-channel MOSFETs uses fixed 600kHz frequency, voltage-mode PWM control and integrates power-on-reset(POR), built-in soft-start, output under-voltage monitoring and shutdown functions into a single chip. The linear controller which drives a N-channel MOSFET bypass transistor allows users to optimize the transient response by external components. The POR circuit with hysteresis monitors both 5VCC and 12VCC supply voltages to start up/shutdown the IC at power-on/off. An internal 0.8V temperature-compensated reference is designed to meet the low output voltage requirement for further applications. The built-in soft-start function sets the soft-start interval to prevent the output voltages from overshoot as well as limiting the input currents. The under-voltage protections monitor the voltages at FB and FB2 for short-circuit protection. The under-voltage protections cycle the soft-start function until 3 times of UVP events are happened. Pulling and holding the FB2 pin above 1.28V to disable the both controllers.
Symbol | Parameter | Rating | Unit |
5VCC | 5VCC Supply Voltage (5VCC to GND) | -0.3 ~ 7 | V |
12VCC | 12VCC Supply Voltage (12VCC to GND) | -0.3 ~ 15 | V |
UAGTE, DRIVE2 to GND | -0.3 ~ 12VCC | V | |
LGATE, FB, FB2 to GND | -0.3 ~ 5VCC | V | |
Maximum Junction Temperature | 150 | °C | |
TSTG | Storage Temperature | -65 ~ 150 | °C |
TSDR | Maximum Soldering Temperature, 10 Seconds | 300 | °C |
VESD | Minimum ESD Rating (Human body model) | ±2 | kV |