Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The BTS 7810 K is part of the TrilithIC family containing three dies in one package: One double high-side switch and two low-side switches. The drains of these three vertical DMOS chips are mounted on separated leadframes. The sources are connected to individual pins, so the BTS 7810 K can be used in H-bridge- as well as in any other configuration. The double high-side is manufactured in SMART SIPMOS® technology which combines low RDS ON vertical DMOS power stages with CMOS control circuit. The high-side switch is fully protected and contains the control and diagnosis circuit. To achieve low RDS ON and fast switching performance, the low-side switches are manufactured in S-FET 2 logic level technology. The equivalent standard product is the SPD30N06S2L-13.
BTS7810K Maximum Ratings
40 °C < Tj < 150 °C
Parameter
Symbol
Limit Values
Unit
Remarks
min.
max.
High-Side-Switches (Pins DHVS, IH1,2 and SH1,2)
Supply voltage
VS
0.3
42
V
Supply voltage for full short circuit protection
VS(SCP)
28
V
HS-drain current
IS
10
*
A
TC = 125°C; DC
HS-input current
IIH
5
5
mA
Pin IH1 and IH2
HS-input voltage
VIH
10
16
V
Pin IH1 and IH2
Note: * internally limited
BTS7810K Features
• Quad D-MOS switch • Free configurable as bridge or quad-switch • Optimized for DC motor management applications • Low RDS ON: 26 m high-side switch, 14 m low-side switch (typical values @ 25 °C) • Maximum peak current: typ. 42 A @ 25 °C • Very low quiescent current: typ. 4 A @ 25 °C • Small outline, thermal optimized PowerPak • Load and GND-short-circuit-protection • Operates up to 40 V • Status flag for over temperature • Open load detection in Off-mode • Overtemperature shut down with hysteresis • Internal clamp diodes • Isolated sources for external current sensing • Under-voltage detection with hysteresis
BTS7810K Connection Diagram
BTS781GP General Description
The BTS 781 GP is part of the TrilithIC family containing three dies in one package: One double high-side switch and two low-side switches. The drains of these three vertical DMOS chips are mounted on separated leadframes. The sources are connected to individual pins, so the BTS 781 GP can be used in H-bridge- as well as in any other configuration. The double high-side is manufactured in SMART SIPMOS® technology which combines low RDS ON vertical DMOS power stages with CMOS control circuit. The high-side switch is fully protected and contains the control and diagnosis circuit. To achieve low RDS ON and fast switching performance, the low-side switches are manufactured in S-FET 2 logic level technology. The equivalent standard product is the SPD30N06S2L-13.
BTS781GP Maximum Ratings
40 °C < Tj < 150 °C
Parameter
Symbol
Limit Values
Unit
Remarks
min.
max.
High-Side-Switches (Pins DHVS, IH1,2 and SH1,2)
Supply voltage
VS
0.3
42
V
Supply voltage for full short circuit protection
VS(SCP)
28
V
HS-drain current
IS
10
*
A
TC = 125°C; DC
HS-input current
IIH
5
5
mA
Pin IH1 and IH2
HS-input voltage
VIH
10
16
V
Pin IH1 and IH2
Note: * internally limited
BTS781GP Features
• Quad D-MOS switch • Free configurable as bridge or quad-switch • Optimized for DC motor management applications • Low RDS ON: 26 m high-side switch, 14 m low-side switch (typical values @ 25 °C) • Maximum peak current: typ. 42 A @ 25 °C • Very low quiescent current: typ. 4 A @ 25 °C • Small outline, thermal optimized PowerPak • Load and GND-short-circuit-protection • Operates up to 40 V • Status flag for over temperature • Open load detection in Off-mode • Overtemperature shut down with hysteresis • Internal clamp diodes • Isolated sources for external current sensing • Under-voltage detection with hysteresis