CR6842, CR6848, CR6848-DIP Selling Leads, Datasheet
MFG:Chip-Rail Package Cooled:SOP-8 D/C:09+/10+
CR6842, CR6848, CR6848-DIP Datasheet download
Part Number: CR6842
MFG: Chip-Rail
Package Cooled: SOP-8
D/C: 09+/10+
MFG:Chip-Rail Package Cooled:SOP-8 D/C:09+/10+
CR6842, CR6848, CR6848-DIP Datasheet download
MFG: Chip-Rail
Package Cooled: SOP-8
D/C: 09+/10+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: CR6842
File Size: 133475 KB
Manufacturer:
Download : Click here to Download
PDF/DataSheet Download
Datasheet: CR6848
File Size: 297683 KB
Manufacturer: Chip Rail
Download : Click here to Download
PDF/DataSheet Download
Datasheet: CR6002AA
File Size: 81305 KB
Manufacturer: LITTELFUSE [Littelfuse]
Download : Click here to Download
The CR6842 is a low startup current , low cost, current mode PWM controller with Green-Power & burst-mode power-saving operation. The integrated functions such as the leading-edge blanking of the current sensing, internal slope compensation provide the users a high efficiency, low external component counts, and low cost solution for AC/DC power applications. The special Green-Power function provides off-time modulation to linearly decrease the switching frequency under light-load conditions. And under zero-load conditions, the power supply enters burst-mode to further reduce power consumption by shutting off PWM output. When the output of power supply is short or over loaded, the FB voltage will increase ,and if the FB voltage is higher than 5.2V for longer than 56msec the PWM output will be turned off. A external NTC resistor connected from pin RT to ground can be applied to over-temperature protection. Pulse by pulse current limit ensures a constant output current even under short circuit. PWM output will be disabled as long as VDD exceeds a threshold. When internal latch circuit is used to latch-off the controller, the latch will be reset when the power supply VDD is disabled.
Symbol |
Parameter |
Rating |
Unit | |
VDD |
Supply voltage Pin Voltage |
40 |
V | |
VFB |
Input Voltage to FB Pin |
-0.3 to 6V |
V | |
VSense |
Input Voltage to SENSE Pin |
-0.3 to 6V |
V | |
PD |
Power Dissipation |
1000 |
mW | |
ESD Capability, HBM Model |
2000 |
V | ||
ESD Capability, Machine Model |
200 |
V | ||
TL |
Lead Temperature(Soldering) | DIP-8(10sec) |
260 230 |
|
SOP-8(10sec) | ||||
TSTG |
Storage Temperature Range |
-55 to + 150 |
The CR6848 is a highly integrated low cost current mode PWM controller, which is ideal for small power current mode of offline AC-DC fly-back converter applications. Making use of external resistors, the IC changes the operating frequency and automatically enters the PFM/CRM under light-load/zero-load conditions. This can minimize standby power consumption and achieve green-power functions. With a very low start-up current, the CR6848 could use a large value start-up resistor (1.5Mohm). Built-in synchronized slope compensation enhances the stability of the system and avoids sub-harmonic oscillation. Dynamic peak limiting circuit minimizes output power change caused by delay time of the system over a universal AC input range. Leading edge blanking circuit on current sense input could remove the signal glitch due to snubber circuit diode reverse recovery and thus greatly reduces the external component count and system cost in the design. Pulse-by-pulse current limiting ensures safe operation even during short-circuit.
The CR6848 offers more protection like OVP (Over Voltage Protection) and OCP (Over current protection). The CR6848's output driver is clamped to maximum 16.5V to protect the power MOSFET. Excellent EMI performance is achieved soft switching control at the totem pole gate driver output. CR6848 is offered in SOT-23-6, SOP-8 and DIP-8 packages.
Symbol |
Parameter |
Rating |
Unit | |
VDD |
Supply voltage Pin Voltage |
40 |
V | |
IOVP |
VDD OVP maximal enter current |
20 |
mA | |
VFB |
Input Voltage to FB Pin |
-0.3 to 6V |
V | |
VSEN |
Input Voltage to SEN Pin |
-0.3 to 6V |
V | |
PD |
Power Dissipation |
300 |
mW | |
ESD Capability, HBM Model |
2000 |
V | ||
ESD Capability, Machine Model |
200 |
V | ||
TL |
Lead Temperature (Soldering) |
20 second SOT-23-6L |
220 |
|
10 second DIP-8 |
260 |
|||
TSTG |
Storage Temperature Range |
-55 to + 150 |