DS2144Q, DS2148, DS2148G Selling Leads, Datasheet
MFG:DS Package Cooled:1577 D/C:00+
DS2144Q, DS2148, DS2148G Datasheet download

Part Number: DS2144Q
MFG: DS
Package Cooled: 1577
D/C: 00+
MFG:DS Package Cooled:1577 D/C:00+
DS2144Q, DS2148, DS2148G Datasheet download

MFG: DS
Package Cooled: 1577
D/C: 00+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: DS2
File Size: 68288 KB
Manufacturer: Linear
Download : Click here to Download
PDF/DataSheet Download
Datasheet: DS2148
File Size: 557818 KB
Manufacturer: DALLAS [Dallas Semiconducotr]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: DS2148G
File Size: 557818 KB
Manufacturer: DALLAS [Dallas Semiconducotr]
Download : Click here to Download
The DS2148 is a complete selectable E1 or T1 Line Interface Unit (LIU) for short- and long-haul applications. Throughout the data sheet, J1 is represented wherever T1 exists. Receive sensitivity adjusts automatically to the incoming signal and can be programmed for 0dB to 12dB or 0dB to 43dB for E1 applications and 0dB to 30dB or 0dB to 36dB for T1 applications. The device can generate the necessary G.703 E1 waveshapes in 75 or 120 applications and DSX-1 line build outs or CSU line build outs of 0dB, -7.5dB, -15dB, and -22.5dB for T1 applications. The crystal-less onboard jitter attenuator requires only a 2.048MHz MCLK for both E1 and T1 applications (with the option of using a 1.544MHz MCLK in T1 applications). The jitter attenuator FIFO is selectable to either 32 bits or 128 bits in depth and can be placed in either the transmit or receive data paths. An X 2.048MHz output clock synthesized to RCLK is available for use as a backplane system clock (where n = 1, 2, 4, or 8). The DS2148 has diagnostic capabilities such as loopbacks and PRBS pattern generation/detection. 16-bit loop-up and loop-down codes can be generated and detected. The device can be controlled via an 8-bit parallel muxed or nonmuxed port, serial port or used in hardware mode. The device fully meets all of the latest E1 and T1 specifications including ANSI T1.403-1999, ANSI T1.408, AT&T TR 62411, ITU G.703, G.704, G.706, G.736, G.775, G.823, I.431, O.151, O.161, ETSI ETS 300 166, JTG.703, JTI.431, JJ-20.1, TBR12, TBR13, and CTR4.

