Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The DS2431 is a 1024-bit, 1-Wire® EEPROM chip organized as four memory pages of 256 bits each. Data is written to an 8-byte scratchpad, verified, and then copied to the EEPROM memory. As a special feature, the four memory pages can individually be write protected or put in EPROM-emulation mode, where bits can only be changed from a 1 to a 0 state. The DS2431 communicates over the singleconductor 1-Wire bus. The communication follows the standard Dallas Semiconductor 1-Wire protocol. Each device has its own unalterable and unique 64- bit ROM registration number that is factory lasered into the chip. The registration number is used to address the device in a multidrop 1-Wire net environment.
DS2431 Maximum Ratings
I/O Voltage to GND ........................................-0.5V, +6V I/O Sink Current .....................................................20mA Operating Temperature Range ..............-40°C to +85°C Junction Temperature .........................................+150°C Storage Temperature Range ..................-40°C to +85°C Soldering Temperature .........See IPC/JEDEC J-STD-020A
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to the absolute maximum rating conditions for extended periods may affect device reliability.
DS2431 Features
· 1024 Bits of EEPROM Memory Partitioned into Four Pages of 256 Bits · Individual Memory Pages can be Permanently Write Protected or Put in EPROM-Emulation Mode ("Write to 0") · Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise · IEC 1000-4-2 Level 4 ESD Protection (8kV Contact, 15kV Air) · Reads and Writes Over a Wide Voltage Range of 2.8V to 5.25V from -40°C to +85°C · Communicates to Host with a Single Digital Signal at 15.4kbps or 111kbps Using 1-Wire Protocol
DS2431 Typical Application
· Accessory/PC Board Identification · Medical Sensor Calibration Data Storage · Analog Sensor Calibration Including IEEE-1451.4 Smart Sensors · Ink and Toner Print Cartridge Identification · After-Market Management of Consumables