Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The Fairchild Universal Bus Switch FSTUD32450 provides 4-bit, 5-bit, 8-bit, 10-bit, 16-bit, 20-bit...40-bit of high-speed CMOS TTL-compatible bus switching. The low On Resistance of the switch allows inputs to be connected to outputswithout adding propagation delay or generating additional ground bounce noise.
The FSTUD32450 is designed to allow "customer" configuration control of the enable connections. The device can be organized as either a ten 4-bit, eight 5-bit, four 10-bit, two 20-bit or one 40-bit enabled bus switch. lso chievable are 8-bit and 16-bit enabled configurations (see Functional Description). The device's bit configuration is controlled through select pin logic. (see Truth Table). When OEx is LOW, Port Ax is connected to Port Bx. When OEx is HIGH, the switch is OPEN.
The A and B Ports are protected against undershoot to support an extended range to 2.0V below ground. Fairchild's integrated Undershoot Hardened Circuit (UHC) senses undershoot at the I/O, and responds by preventing voltage differentials from developing and turning the switch on.
Another innovative device feature is the addition of a level shifting select pin, "S2 and S5". When S2 and S5 are LOW, the device behaves as a standard N-MOS switch. When S2 and S5 are HIGH, a diode to VCC is integrated into the circuit allowing for level shifting between 5V inputs and 3.3V outputs.
FSTUD32450 Maximum Ratings
Supply Voltage (VCC) −0.5V to +7.0V DC Switch Voltage (VS) (Note 4) −2.0V to +7.0V DC Input Control Pin Voltage (VIN) (Note 5) −0.5V to +7.0V DC Input Diode Current (lIK) VIN < 0V −50 mA DC Output (IOUT) Current 128 mA DC VCC/GND Current (ICC/IGND) +/− 100 mA Storage Temperature Range (TSTG) −65°C to +150 °C
FSTUD32450 Features
· Undershoot protected to −2V (A and B Ports) · Voltage level shifting ·4Ω switch connection between two ports · Minimal propagation delay through the switch · Low lCC · Zero bounce in flow-through mode · Control inputs compatible with TTL level · See Applications Notes AN-5008 and AN-5021 for UHC details · Packaged in plastic Fine-Pitch Ball Grid Array (FBGA)
FSTUD32450 Typical Application
Select pins S0, S1, S2, S3, S4 and S5 are intended to be used as static user configurable control pins. The AC performance of these pins has not been characterized or tested. Switching of these select pins during system operation may temporarily disrupt output logic states and/or enable pin controls. 40-bit configuration can be achieved by connecting the OE1 and the OE6 pins to together.