Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
In order to ensure voltage ratings in excess of 600V, the L6574 is manufactured with BCD OFF LINE technology, which makes it well suited for lamp ballast applications.
The device is intended to drive two power MOSFETS, in the classical half bridge topology, ensuring all the features needed to drive and properly control a fluorescent bulb.
A dedicated timing section in the L6574 allows the user set the necessary parameters for proper preheat and ignition of the lamp.
Also, an OP AMP is available to implement closed loop control of the lamp current during normal lamp burning.
An integrated bootstrap section, eliminating the normally required bootstrap diode and the zener clamping on Vs, makes the L6574 well suited for low cost applications where few additional components are needed to build a high performance ballast.
L6574 Maximum Ratings
Symbol
Parameter
Value
Unit
IS
Supply Current (*)
25
mA
VLVG
Low Side Output
-0.3 to Vs +0.3
V
VOUT
High Side Reference
-1 to VBOOT -18
V
VHVG
High Side Output
-1 to VBOOT
V
VBOOT
Floating Supply Voltage
-1 to 618
V
dVBOOT/dt
VBOOT pin Slew rate (repetitive)
±50
V/ns
dVOUT/dt
OUT pin Slew Rate (repetitive)
±50
V/ns
Vir
Forced Input Voltage (pins Ring, Rpre)
-0.3 to 5
V
Vic
Forced Input Voltage (pins Cpre, Cf)
-0.3 to 5
V
VEN1, VEN2
Enable Input Voltage
-0.3 to 5
V
IEN1, IEN2
Enable Input Current
±3
mA
Vopc
Sense Op Amp Common Mode Range
-0.3 to 5
V
Vopd
Sense Op Amp Differential Mode Range
±5
V
Vopo
Sense Op Amp Output Voltage (forced)
4.6
V
Tstg, Tj
Storage Temperature
-40 to +150
°C
Tamb
Ambient Temperature
-40 to +125
°C
(*) The device has an internal Clamping Zener between GND and the VCC pin, it must not be supplied by a Low Impedance Voltage Source.
Note: ESD immunity for pins 14, 15 and 16 is guaranteed up to 900V (Human Body Model)
L6574 Features
·HIGH VOLTAGE RAIL UP TO 600V ·dV/dt IMMUNITY ± 50 V/ns IN FULL TEMPERATURE RANGE ·DRIVER CURRENT CAPABILITY: 250mA SOURCE 450mA SINK ·SWITCHING TIMES 80/40ns RISE/FALL ·WITH 1nF LOAD ·CMOS SHUT DOWN INPUT ·UNDER VOLTAGE LOCK OUT ·PREHEAT AND FREQUENCY SHIFTING TIMING ·SENSE OP AMP FOR CLOSED LOOP ·CONTROL OR PROTECTION FEATURES ·HIGH ACCURACY CURRENT CONTROLLED OSCILLATOR ·INTEGRATED BOOTSTRAP DIODE ·CLAMPING ON VS. ·SO16, DIP 16 PACKAGES
L6574 Connection Diagram
L6574D Parameters
Technical/Catalog Information
L6574D
Vendor
STMicroelectronics
Category
Integrated Circuits (ICs)
Package / Case
16-SOIC (3.9mm Width)
Packaging
Tube
Voltage - Supply
10 V ~ 15.6 V
Type
CCFL Driver
Current - Supply
2mA
Current - Output
450mA
Frequency
60 ~ 120 kHz
Operating Temperature
-40°C ~ 125°C
Drawing Number
*
Lead Free Status
Lead Free
RoHS Status
RoHS Compliant
Other Names
L6574D L6574D
L6574D General Description
In order to ensure voltage ratings in excess of 600V, the L6574 is manufactured with BCD OFF LINE technology, which makes it well suited for lamp ballast applications.
The device is intended to drive two power MOSFETS, in the classical half bridge topology, ensuring all the features needed to drive and properly control a fluorescent bulb.
A dedicated timing section in the L6574 allows the user set the necessary parameters for proper preheat and ignition of the lamp.
Also, an OP AMP is available to implement closed loop control of the lamp current during normal lamp burning.
An integrated bootstrap section, eliminating the normally required bootstrap diode and the zener clamping on Vs, makes the L6574 well suited for low cost applications where few additional components are needed to build a high performance ballast.
L6574D Maximum Ratings
Symbol
Parameter
Value
Unit
IS
Supply Current (*)
25
mA
VLVG
Low Side Output
-0.3 to Vs +0.3
V
VOUT
High Side Reference
-1 to VBOOT -18
V
VHVG
High Side Output
-1 to VBOOT
V
VBOOT
Floating Supply Voltage
-1 to 618
V
dVBOOT/dt
VBOOT pin Slew rate (repetitive)
±50
V/ns
dVOUT/dt
OUT pin Slew Rate (repetitive)
±50
V/ns
Vir
Forced Input Voltage (pins Ring, Rpre)
-0.3 to 5
V
Vic
Forced Input Voltage (pins Cpre, Cf)
-0.3 to 5
V
VEN1, VEN2
Enable Input Voltage
-0.3 to 5
V
IEN1, IEN2
Enable Input Current
±3
mA
Vopc
Sense Op Amp Common Mode Range
-0.3 to 5
V
Vopd
Sense Op Amp Differential Mode Range
±5
V
Vopo
Sense Op Amp Output Voltage (forced)
4.6
V
Tstg, Tj
Storage Temperature
-40 to +150
°C
Tamb
Ambient Temperature
-40 to +125
°C
(*) The device has an internal Clamping Zener between GND and the VCC pin, it must not be supplied by a Low Impedance Voltage Source.
Note: ESD immunity for pins 14, 15 and 16 is guaranteed up to 900V (Human Body Model)
L6574D Features
·HIGH VOLTAGE RAIL UP TO 600V ·dV/dt IMMUNITY ± 50 V/ns IN FULL TEMPERATURE RANGE ·DRIVER CURRENT CAPABILITY: 250mA SOURCE 450mA SINK ·SWITCHING TIMES 80/40ns RISE/FALL ·WITH 1nF LOAD ·CMOS SHUT DOWN INPUT ·UNDER VOLTAGE LOCK OUT ·PREHEAT AND FREQUENCY SHIFTING TIMING ·SENSE OP AMP FOR CLOSED LOOP ·CONTROL OR PROTECTION FEATURES ·HIGH ACCURACY CURRENT CONTROLLED OSCILLATOR ·INTEGRATED BOOTSTRAP DIODE ·CLAMPING ON VS. ·SO16, DIP 16 PACKAGES