LS7231, LS7231-S, LS7232 Selling Leads, Datasheet
MFG:DIP-8P Package Cooled:LSI D/C:03+
LS7231, LS7231-S, LS7232 Datasheet download

Part Number: LS7231
MFG: DIP-8P
Package Cooled: LSI
D/C: 03+
MFG:DIP-8P Package Cooled:LSI D/C:03+
LS7231, LS7231-S, LS7232 Datasheet download

MFG: DIP-8P
Package Cooled: LSI
D/C: 03+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: LS7231
File Size: 72137 KB
Manufacturer: LSI [LSI Computer Systems]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: LS7030
File Size: 68055 KB
Manufacturer: LSI [LSI Computer Systems]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: LS7232ND
File Size: 49995 KB
Manufacturer: LSI [LSI Computer Systems]
Download : Click here to Download
LS7231 through LS7234 are a series of monolithic, MOS integrated circuits designed for the control of brightness of incandescent lamps. The outputs of these ICs control the brightness of a lamp by controlling the firing angle of a triac connected in series with the lamp. All internal timings are synchronized with the line frequency by means of a built-in phase-lock loop circuit. The output occurs once every half-cycle of the line frequency. Within the halfcycle, the output can be positioned anywhere between 158°conduction angle for maximum brightness and 41° conduction angle for minimum brightness in relation to the AC line frequency. The positioning of the output is controlled by applying a low level at the SENS input or a high level at the EXT input.
These functions may be implemented with very few interface components, as shown in Figure 5. When implemented in this manner, touching of the Touch Plate causes the lamp brightness to change as follows:
1. If the Touch Plate is touched momentarily (42ms to 333ms), the lamp is:
a) turned off if it was on,
b) turned on if it was off.
The brightness resulting is either full brightness or depending on the circuit type, a previous brightness stored in the IC memory.
2. If the Touch Plate is touched for a prolonged time (more than 342ms) the light intensity changes slowly. As long as the touch is maintained, the change continues; the direction of change reverses whenever the maximum or minimum brightness is reached.
The IC also provides an input for slow dimming. By applying a slow clock to this input, the lamp can be dimmed slowly until total turn off occurs. This feature can be useful at bedtime in a child's room.
| PARAMETER |
SYMBOL |
VALUE |
UNITS |
| DC Supply Voltage |
VSS |
+20 |
V |
| Voltage at any input |
VIN |
VSS -20 to VSS + 0.5 |
V |
| Operating temperature |
TA |
0 to +80 |
°C |
| Storage temperature |
TSTG |
-65 to +150 |
°C |

