Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The TPS382x family of supervisors provides circuit initialization and timing supervision, primarily for DSP and processor-based systems.
During power-on, RESET is asserted when supply voltage VDD becomes higher than 1.1 V. Thereafter, the supply voltage supervisor monitors VDD and keeps RESET active as long as VDD remains below the threshold voltage VIT. An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time, td, starts after VDD has risen above the threshold voltage VIT. When the supply voltage drops below the threshold voltage VIT, the output becomes active (low) again. No external components are required. All the devices of this family have a fixed-sense threshold voltage VIT set by an internal voltage divider.
The TPS3820/3/5/8 devices incorporate a manual reset input, MR. A low level at MR causes RESET to become active. The TPS3824/5 devices include a high-level output RESET. TPS3820/3/4/8 have a watchdog timer that is periodically triggered by a positive or negative transition at WDI. When the supervising system fails to retrigger the watchdog circuit within the time-out interval, ttout, RESET becomes active for the time period td. This event also reinitializes the watchdog timer. Leaving WDI unconnected disables the watchdog.
In applications where the input to the WDI pin may be active (transitioning high and low) when the TPS3820/3/4/8 is asserting RESET, the TPS3820/3/4/8 does not return to a non-reset state when the input voltage is above Vt. If the application requires that input to WDI is active when RESET is asserted, WDI must be decoupled from the active signal. This can be accomplished by using an N-channel FET in series with the WDI pin, with the gate of the FET connected to the RESET output as shown in Figure 1.
The product spectrum is designed for supply voltages of 2.5 V, 3 V, 3.3 V, and 5 V. The circuits are available in a 5-pin SOT23-5 package. The TPS382x-xxQ-Q1 devices are characterized for operation over a temperature range of 40°C to 125°C, and are qualified in accordance with AEC-Q100 stress test qualification for integrated circuits.
TPS3823-25QDBVRQ1 Maximum Ratings
Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . 6 V RESET, RESET, MR, WDI (see Note 1) . . . .0.3 V to (VDD + 0.3 V) Maximum low output current, IOL . . . . . . . . . . . . . . . . . . . . .5 mA Maximum high output current, IOH . . . . . . . . . . . . . . . . . . 5 mA Input clamp current range, IIK (VI < 0 or VI > VDD) . . . . .±10 mA Output clamp current range, IOK (VO < 0 or VO > VDD) . . ±10 mA Continuous total power dissipation . See Dissipation Rating Table Operating free-air temperature range, TA . . . . . .40°C to 125°C Storage temperature range, Tstg . . . . . . . . . . . . 65°C to 150°C Soldering temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . .260°C † Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: All voltage values are with respect to GND.
TPS3823-25QDBVRQ1 Features
Qualification in Accordance With AEC-Q100† Qualified for Automotive Applications Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval† ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Using Human Body Model (C = 100 pF, R = 1500 Ω) Power-On Reset Generator With Fixed Delay Time of 200 ms (TPS3823/4/5/8) or 25 ms (TPS3820) Manual Reset Input (TPS3820/3/5/8) Reset Output Available in Active-Low (TPS3820/3/4/5), Active-High (TPS3824) and Open-Drain (TPS3828) Supply Voltage Supervision Range 2.5 V, 3 V, 3.3 V, 5 V Watchdog Timer (TPS3820/3/4/8) Supply Current of 15 µA (Typ) SOT23-5 Package
TPS3823-25QDBVRQ1 Typical Application
Applications Using Automotive DSPs, Microcontrollers, or Microprocessors Industrial Equipment Programmable Controls Automotive Systems Battery-Powered Equipment Intelligent Instruments Wireless Communications Systems