Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The TPS6102x devices provide a power supply solution for products powered by either a one-cell, wo-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 200 mA while using a single-cell alkaline, and discharge it down to 0.9 V. It can also be used for generating 5 V at 500 mA from a 3.3-V ail or a Li-Ion battery. The boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency. At low load currents the converter enters the Power Save mode to maintain a high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum peak current in the boost switch is limited to a value of 1500 mA.
The TPS6102x devices keep the output voltage regulated even when the input voltage exceeds the nominal output voltage. The output voltage can be programmed by an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. A low-EMI mode is implemented to reduce ringing and, in effect, lower radiated electromagnetic energy when the converter enters the discontinuous conduction mode. The device is packaged in a 10-pin QFN PowerPAD ™ package measuring 3 mm x 3 mm (DRC).
TPS61027 Maximum Ratings
TPS6102x
Input voltage range on SW, VOUT, LBO, VBAT, PS, EN, FB, LBI
-0.3 V to 7 V
Operating virtual junction temperature range, TJ
-40 ° C to 150 ° C
Storage temperature range Tstg
-65 ° C to 150 ° C
TPS61027 Features
*96% Efficient Synchronous Boost Converter 200-mA Output Current From 0.9-V Input 500-mA Output Current From 1.8-V Input *Output Voltage Remains Regulated When In put Voltage Exceeds Nominal Output Voltage *Device Quiescent Current: 25- µ A (Typ) *Input Voltage Range: 0.9-V to 6.5-V *Fixed and Adjustable Output Voltage Options Up to 5.5-V *Power Save Mode for Improved Efficiency at Low Output Power *Low Battery Comparator *Low EMI-Converter (Integrated Antiringing Switch) *Load Disconnect During Shutdown *Over-Temperature Protection Small 3 mm x 3 mm QFN-10 Package
TPS61027 Typical Application
*All One-Cell, Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products *Portable Audio Players *PDAs *Cellular Phones *Personal Medical Products