The 74AUP1GU04 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible families.This device ensures a very low static and dynamic power consumption across the entire ...

The 74AUP1G126 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.Schmitt-trigger action at all inputs makes the circuit tolerant to slower input ri...

The 74AUP1G32 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.Schmitt-trigger action at all inputs makes the circuit tolerant to slower input ris...

The 74AUP1G79 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.Schmitt-trigger action at all inputs makes the circuit tolerant to slower input ris...

The 74AUC1G02is a high-performance, low-power, low-voltage, Si-gate CMOS device.Schmitt-trigger action at all inputs makes the circuit tolerant for slower input rise and fall time.This device is fully specified for parti...

The 74F573 is an octal transparent latch coupled to eight 3-State output buffers. The two sections of the device are controlled independently by Enable (E) and Output Enable (OE) control gates.The 74F573 is functionally ...

The 'F574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The information presented to the D inputs is stored in the flip-flops on the LOW-to-HIGH Cl...

The 74F579 is a fully synchronous 8-stage up/down counter with multiplexed 3-STATE I/O ports for bus-oriented applications. It features a preset capability for programmable operation, carry lookahead for easy cascading a...

The 74F563 is a high-speed octal latch with buffered common Latch Enable (LE) and buffered common Output Enable (OE) inputs.This device is functionally identical to the 74F573, but has inverted outputs.

The 79L00A Series of three terminal negative voltage regulators is available with several fixed output voltages making them useful in a wide range of applications. These regulators are inexpensive, vise-to-use devices su...

The LCX32646 contains thirty-two non-inverting bidirectional registered bus transceivers with 3-STATE outputs, providing multiplexed transmission of data directly from the input bus or from the internal storage registers...

The VCX32373 contains thirty-two non-inverting latches with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. The flip-flops appear to be transparent to the data when the Latch...

The LCX32373 contains thirty-two non-inverting latches with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. The flip-flops appear transparent to the data when the Latch Enabl...

The VCX32500 is an 36-bit universal bus transceiver which combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, and clocked modes. Data flow in each direction is controlled by output-e...

These 36-bit universal bus transceivers combine D-type latches and D-type flip-flops to allow data flow in transparent, latched, and clocked modes.Data flow in each direction is controlled by output-enable (OEAB and OEBA...

The LCX374 is a low voltage CMOS OCTAL D-TYPE FLIP FLOP with 3 STATE OUTPUT NON INVERTING fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and high speed a...

The LCX32652 contains thirty-two non-inverting bidirectional bus transceivers with 3-STATE outputs providing multiplexed transmission of data directly from the input bus or from the internal registers. Data on the A or B...

The VCX38 contains four 2-input NAND gates with open drain outputs. This product is designed for low voltage (1.65V to 3.6V) VCC applications with I/O compatibility up to 3.6V.The VCX38 is fabricated with advanced CMOS t...

The VCX32 contains four 2-input OR gates. This product is designed for low voltage (1.2V to 3.6V) VCC applications with I/O compatibility up to 3.6V.The VCX32 is fabricated with an advanced CMOS technology to achieve hig...

The LCX540 is an octal buffer/line driver designed to be employed as a memory and address driver, clock driver and bus oriented transmitter/receiver. This device is similar in function to the LCX240 while providing flow-...

The LCX573 is a high-speed octal latch with buffered common Latch Enable (LE) and buffered common Output Enable (OE) inputs.The LCX573 is functionally identical to the LCX373 but has inputs and outputs on opposite sides....

The LCX543 is a non-inverting octal transceiver containing two sets of D-type registers for temporary storage of data flowing in either direction. Separate Latch Enable and Output Enable inputs are provided for each regi...

The LCX574 is a high-speed, low power octal flip-flop with a buffered common Clock (CP) and a buffered common Output Enable (OE). The information presented to the D inputs is stored in the flip-flops on the LOW-to-HIGH C...

The TPS793xx family of low-dropout (LDO) low-power linear voltage regulators features high power-supply rejection ratio (PSRR), ultralow noise, fast start-up, and excellent line and load transient responses in a small-ou...

The 7531 Group is the 8-bit microcomputer based on the 740 family core technology.The 7531 Group has a serial I/O, 8-bit timers, and an A-D converter, and is useful for control of home electric appliances and office aut...

The 74F595 contains an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has parallel 3-State outputs. Separate clocks are provided for both the shift register...

The 74ALVT16899 is a high-performance BiCMOS product designed for VCC operation at 2.5V or 3.3V with I/O compatibility up to 5V.The 74ALVT16899 is a 16-bit to 16-bit parity transceiver with separate transparent latches f...

The 74ALVT16731 is a high-performance BiCMOS product designed for VCC operation at 2.5V to 3.3V with I/O compatibility up to 5V. This device is a 1-to-4 address register/driver featuring non-inverting 3-State outputs. Th...

The 74HC3G06/74HCT3G06 is a high-speed Si-gate CMOS device. Specified in compliance with JEDEC standard no. 7A.The 74HC3G06/74HCT3G06 provides three inverting buffers.The outputs of the 74HC3G06; 74HCT3G06 devices are op...

The 74HC3GU04 is a high-speed Si-gate CMOS device.The 74HC3GU04 provides the inverting single stage function.

The 74AUC1G32 is a high-performance, low-power, low-voltage, Si-gate CMOS device.Schmitt-trigger action at all inputs makes the circuit tolerant for slower input rise and fall time.This device is fully specified for part...

The 74AUC1G04 is a high-performance, low-power, low-voltage, Si-gate CMOS device.Schmitt-trigger action at all inputs makes the circuit tolerant for slower input rise and fall time.This device is fully specified for part...

The 74LCX373 is a low voltage CMOS OCTAL D-TYPE LATCH with 3 STATE OUTPUT NON-INVERTING fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and high speed 3.3...

The 74ALVT162731 is a high-performance BiCMOS product designed for VCC operation at 2.5V to 3.3V with I/O compatibility up to 5V.This device is a 1-to-4 address register/driver featuring non-inverting 3-State outputs. Th...

The 74FR900 is a data bus multiplexer routing any of three 9-bit ports to any other one of the three ports. Readback of data latched from any port onto itself is also possible. The 74FR900 maintains separate control of a...

The 74FR9244 is a non-inverting 9-bit buffer and line driver designed to be employed as memory and address driver, clock driver and bus-oriented transmitter/receiver.

The 74FR9240 is an inverting 9-bit buffer and line driver designed to be employed as memory and address driver, clock driver and bus oriented transmitter or receiver.

The 74FR9245 contains nine non-inverting bidirectional buffers with 3-STATE outputs and is intended for bus-oriented applications. Current sinking capability is 64 mA on both the A and B Ports. The Transmit/Receive (T/R)...

The VCX32374 contains thirty-two non-inverting D-type flip-flops with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. A buffered clock (CP) and output enable (OE) are common ...