1812SDF-1R0

Features:






Specifications






Description

      The 1812SDF-1R0 is a frontier electronics corp product which has many features that you should make it clear before you purchase this kind of product. The first feature you should make an understanding is that the 1812SDF series 's tolerance whose J is ± 5% K is ± 10% and M is ± 20%. And this also is an important parameter for this kind of product. As is known to all, the temperature is an important factor during operating. So making an understanding of the temperature is essential, and the operating temperature ranges from-25 to 85. What's more, you should set the electrical specifications to the temperature of 25 . Only by doing this can you promise the product work normally. As a wise consumer, you should know that the inductance which is measured on the HP4284A LCR meter. The fifth feature you should make an understanding about the product is the DCR which is measured on the 502BC milli-ohm meter. At rated current, the Inductance drops no more than 10%. At the same time, the temperature rises t < 20ºC (Typical). The eighth feature is that the 1812SDF series is suitable for IR re-flows soldering and the 1812SDF series is tape and reel packing. The ninth feature is about the capability of the product that the 1812SDF series is compatible with murata P/N LQH43CN series. The last one but not the least important feature you should know is that the 1812SDF series is compliant with the RoHS.
      The 1812SDF-1R0 has some applications listed as follows. The first application you should know is that the power supply line choke. The second one about the 1812SDF series is that it has DC-DC converters. The third application you should make an understanding about the product is that it also can applied to notebooks. The 1812SDF series also can be used as filters which contribute to the 1812SDF series to be a multifunctional product. The last important application is that the 1812SDF series can be applied to telecommunications devices.
      The 1812SDF-1R0 has mechanical dimensions for different series. Series A's value is 4.5 ± 0.30mm,B's value is 3.2 ± 0.30mm,C's value is 2.6 ± 0.30mm,D's min value is 1.0mm,E's min value is 1.0mm and F's value is 4.0 Ref. The type of the 1812SDF series is 2. If you are willing to find more about the 1812SDF series, please pay attention to our web! We will promptly update the relevant information.