Specifications | Package | PQFP 64 |
| Speed | NA |
| Temperature | I |
| Voltage | 3.3 V |
Description3.3V 10BASE-T/100BAS
The 1893BYI-10 is a low-power, physical-layer device (PHY) that supports the ISO/IEC 10Base-T and 100Base-TX Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) Ethernet standards, ISO/IEC 8802-3.
The 1893BYI-10 is intended for MII, Node applications that require the Auto-MDIX feature that automatically corrects crossover errors in plant wiring.
The 1893BYI-10 incorporates Digital-Signal Processing (DSP) control in its Physical-Medium Dependent (PMD) sub layer. As a result, it can transmit and receive data on unshielded twisted-pair (UTP) category 5 cables with attenuation in excess of 24 dB at 100MHz. With this ICS-patented technology, the 1893BYI-10 can virtually eliminate errors from killer packets.
The 1893BYI-10 provides a Serial-Management Interface for exchanging command and status information with a Station-Management (STA) entity.
The 1893BYI-10 Media-Dependent Interface (MDI) can be configured to provide either half- or full duplex operation at data rates of 10 Mb/s or 100Mb/s.
Supports category 5 cables with attenuation in excess of 24dB at 100 MHz.
Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sub layers functions of IEEE standard.
10Base-T and 100Base-TX IEEE 8802.3 compliant
Single 3.3V power supply
Highly configurable, supports:
Media Independent Interface (MII)
Auto-Negotiation with Parallel detection
Node applications, managed or unmanaged
10M or 100M full and half-duplex modes
Loopback mode for Diagnostic Functions
Auto-MDI/MDIX crossover correction
Low-power CMOS (typically 400 mW)
Power-Down mode typically 21mW
Clock and crystal supported
Fully integrated, DSP-based PMD includes:
Adaptive equalization and baseline-wander correction
Transmit wave shaping and stream cipher scrambler
MLT-3 encoder and NRZ/NRZI encoder
Small footprint 48-pin 300 mil. SSOP package
Also available in small footprint 56-pin 8x8 MLF2 package
Available in Industrial Temp and Lead Free
1893BYI-10 Data Sheet
