2010

Operating Temperature (Case & Cable) . . . . -55 to +125
Operating Temperature (Connector) . . . . . . .  -40 to +65
Storage Temperature . . . . . . . . . . . . . . . . . . . -40 to +65
Acceleration Over-range . . . . . . . . . . . . . . 2000g for 0.1 ms
Voltage on V_DD to GND . . . . . . . . . . . . . . . . . . -0.5V to 6.5V
Voltage on CNT or CLK to GND ¹ . . . . . . . -0.5V to V_DD+0.5V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mW
* NOTICE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only. Functional operation of the device at or above these conditions is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

The model 2010 single axis accelerometer module is designed to be used with the model 3020 G-LOGGER_TM Acceleration Acquisition System. Up to three 2010's may be connected to a G-LOGGER_TM using a model 3901 Cable Adapter. The 2010 contains a model 1010L accelerometer which features a micromachined capacitive sense element, a custom integrated circuit sense amplifier, and sigmadelta A/D converter. It provides a TTL/CMOS compatible output signal for measuring accelerations in commercial/industrial environments and is tailored for zero to medium frequency instrumentation applications. The anodized aluminum case is epoxy sealed and is easily mounted via two #4 (or M3) screws. It is relatively insensitive to temperature changes and gradients. An optional calibration sheet (2010-CAL) and periodic calibration checking are available.