25D-1A11N1

      The 25D-1A11N1 is designed as muniature reed relays and it would sypport to high insulation applications. Standardized packageing and easy to make air connections to keep high insulation resistance on the PCB. Both series have the function lightweight, low capacitance and magnetic shield.
      Some absolute maximum ratings and electrical characteristics of 25D-1A11N1 have been concluded into several points as follow.The first one is about 25D-1A11N1's switching voltage which would be 100V.The second one is about its switching current which would be 0.5A.The third one is about its carry current which would be 1.0A.The fourth one is about its contact rating which would be 10W.The next one is about its life expectancy which would be 10E9 cycles.The next one is about its contact resistance which would be 150m.The next one is about its contact resistance stability which would be 5.0m.The next one is about its insulation resistance which would be from 10E11 to 10E13.The next one is about its capatance which would be 0.2 for across open contacts and would be 1.2 for contact to shield.The next one is about its open contact to coil which would be 0.5.The next one is about its dielectric strength which would be 200Vdc.The next one is about its operating temrepeture which would be from -20°C to +60°C.The next one is about its humidity which would be from 25% to 85%RH.The next one is about its atmospheric pressure which would be from 860 to 1060hPa.The next one is about 25D-1A11N1's storage temperature which would be from -40°C to +60°C.
      Some notes about 25D-1A11N1. Values are specified with a resistive load being applied. A contact protective circuit is required for C and L type loads.The values for operating time and relsase time however, are when the rated coil voltage is applied and a clamp diode is attached.And so on.For more information please contact us.