2SK2400

      The 2SK2400 is a Silicon N-Channel MOS Type Transistor designed for Chopper Regulator, DC/DC Converter and Motor Drive Applications.The 2SK2400 has 5 features including 4 V gate drive; Low drain-source ON-resistance : RDS (ON) = 17 (typ.);High forward transfer admittance : |Yfs| = 4.5 S (typ.);Low leakage current : IDSS = 100 A (max) (VDS = 100 V);Enhancement mode : Vth = 0.8~2.0 V (VDS = 10 V, ID = 1 mA).
      The absolute maximun ratings of the 2SK2400 are at Ta=25°C, Drain-source voltage VDSS is 100V;Drain-gate voltage (RGS = 20 k) VDGR is 100V;Gate-source voltage VGSS is ±20 V;drain Current ID is 5 A;drain power dissipation is 1.3W;channel temperature is 150°C;Storage temperature is -55 to +150°C.
      When external capacitors are used with any I.C. regulator it is sometimes necessary to add protection diodes to prevent the capacitors from discharging through low current points into the regulator. Figure 18 shows the 2SK2400 with the recommended protection diodes for output voltages in excess of 25 V or high capacitance values (Co > 25uF, Cadj > 10uF). Diode D1 prevents Co from discharging thru the I.C. during an input short circuit. Diode D2 protects against capacitor CADJ discharging through the I.C. during an output short circuit. The combination of diodes D1 and D2 prevents CADJ from discharging through the I.C. during an input short circuit.  
      Information in this document is provided in connection with Intel ® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel ® products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel® products are not intended for use in medical, life saving, or life sustaining applications.The look-ahead carry feature simplifies serial cascading of the counters. Both count enable inputs (PE and TE) must be HIGH to count. The TE input is gated with the Q outputs of all four stages so that at the maximum count, the terminal count (TC) output goes HIGH for one clock period. This TC pulse is used to enable the next cascaded stage.
      At present there is not too much information about this model.If you are willing to find more  about 2SK2400, please pay attention to our web! We will promptly update the relevant information.