302GD061-359CTV

      The power section of SKiiP 302GD061-359CTV has 8 features.The 1st one is about SKiiP technology inside.The 2nd one is about low loss IGBTs.The 3rd one is about CAL diode technology.The 4th one is that it is integrated with current sensor.The 5th one is that it has integrated temperature sensor .The 6th one is about integrated heat sink.The 7th one is about IEC 60721-3-3(humidity)class 3K3/IE32(SKiiP® 2 System).The last one is about IEC 68T.1(climate)40/125/56 (SKiiP® 2 power section).
      The power section of SKiiP 302GD061-359CTV has some absolute maximum ratings.Note:Ts=25 unless otherwise specified.The VCES of IGBT is 600V.The VCC of IGBT is 400V under the condition of operating DClink voltage.The VGES of IGBT is within ±20V.The IC of IGBT is 300(225)A under the condition of Ts=25(70).The IF=-IC of inverse diode is 300(225)A under the condition of Ts=25(70).The IFSM of inverse diodeis 3000A under the condition of Tj=150 and tp=10ms;sin.The I2t(Diode) of inverse diode is 45kA2s under the condition of Tj=150 and tp=10ms.The Tj(Tstg) is -40(-25)...+150(125).The Visol is 2500V under the condition of AC,1min.(mainterminals to heat sink).
      The following is about 302GD061-359CTV features.The 1st one is about CMOS compatible inputs.The 2nd one is about wide range power supply.The 3rd one is about integrated circuitry to sense phase current,heat sink temperature and DC-bus voltage(option).The 4th one is about short circuit protection.The 5th one is about over current protection.The 6th one is about over voltage protection(option).The 7th one is about power supply protected against under voltage.The 8th one is about interlock of top/bottom switch.The 9th one is about isolation by transformers.The 10th one is about fibre optic interface(option for GB-types only).The last one is about IEC 68T.1(climate)25/85/56 (SKiiP® 2 gate driver).
      The integrated gate driver of SKiiP 302GD061-359CTV has some absolute maximum ratings.Vs1 is 18V under the condition of stabilized 15V power supply.Vs2 is 30V under the condition of unstabilized 24V power supply.ViH is 15+0.3V under the condition of input signal voltage(high). dv/dt is 75kV/s under the condition of secondary to primary side.Viso/IO is 2500Vac under the condition of input/output(AC,r.m.s.,2s).Viso/12 is 1500Vac under the condition of output1/output2(AC,r.m.s.,2s).fmax is 20kHz under the condition of switching frequency.Top(Tstg) is -25...+85 under the condition of operating/storage temperature.