Features: SpecificationsDescription The 30TPS16PbF SAFEIR series of silicon controlled rectifiers are widely used in medium power switching and phase control applications.The operation can reach 125 junction temperature via the glass passivation technology.They are typically used in input rectific...
30TPS16PbF: Features: SpecificationsDescription The 30TPS16PbF SAFEIR series of silicon controlled rectifiers are widely used in medium power switching and phase control applications.The operation can reach 125...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The 30TPS16PbF SAFEIR series of silicon controlled rectifiers are widely used in medium power switching and phase control applications.The operation can reach 125 junction temperature via the glass passivation technology.They are typically used in input rectification and these products are mainly used with international rectifier input diodes, switches and output rectifiers which are available in identical package outlines.
Then you can get some information about the major ratings and characteristics of 30TPS16PbF.IT(AV) at sinusoidal waveform is 20A.IRMS is 30A. VRRM/ VDRM is 1600V.ITSM is 300A.VT is 1.3 V when @ 20A and TJ = 25.Dv/dt is 500 V/s.Di/dt is 150 A/s.TJ is from - 40 to 125 .
Then we come to the voltage ratings of 30TPS16PbF. VRRM/VDRM(max. repetitive peak and off-state voltage) is 1600V. VRSM(maximum non repetitive peak reverse voltage) is 1700V.IRRM/IDRM is 10mA at 125.
The following is the absolute maximum ratings of 30TPS16PbF.It has four parameters.The first one is about theIT(AV)(Max. Average On-state Current) which is 20 A when @ TC = 95 and 180 conduction half sine wave.The second one is about the IRMS (Max. RMS On-state Current) which is 30A.The third one is about the ITSM (Max. Peak One Cycle Non-Repetitive Surge Current) which is 250A on the condition that 10ms sine pulse and rated VRRM applied but 300A on the condition that 10ms sine pulse and no voltage reapplied.The fourth one is about the VTM (Max. On-state Voltage Drop) which is 1.3V when @ 20A and TJ = 25.The fifth one is about the rt (On-state Slope Resistance) which is 12m when TJ = 125.The sixth one is about the VT(TO) (Threshold Voltage) which is 1.0V when TJ = 125.The seventh one is about the IH (Max. Holding Current) which is 100mA when anode supply = 6V, resistive load and initial IT=1A.The eighth one is about the IL (Max. Latching Current) which is 200mA when anode supply = 6V, and resistive load.The ninth one is about the dv/dt (Max. Rate of Rise of off-state Voltage) which is 500V/s.The tenth one is about the di/dt (Max. Rate of Rise of turned-on Current ) which is 150 500A/s.
There is not much information about the 30TPS16PbF.If you want to get more information,please pay attention to our website,we will update timely.