Features: SpecificationsDescription The A3940KLP and A3940KLW are designed especifically for automotive applications which require high-power motors. Each provides four high-current gate drive outputs that are able to drive a wide range of n-channel power MOSFETs in a full bridge configuration. Bo...
3940: Features: SpecificationsDescription The A3940KLP and A3940KLW are designed especifically for automotive applications which require high-power motors. Each provides four high-current gate drive outpu...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The A3940KLP and A3940KLW are designed especifically for automotive applications which require high-power motors. Each provides four high-current gate drive outputs that are able to drive a wide range of n-channel power MOSFETs in a full bridge configuration. Bootstrap capacitors are used to provide the above-battery supply voltage required for n-channel FETs. An internal charge pump for the high side allows for dc (100% duty cycle) operation of the bridge.Protection features include supply under/overvoltage, thermal shutdown, and motor lead short-to-battery and short-to-ground fault notification, and a programmable dead-time adjustment for crossconduction prevention. The A3940 has two choice of power packages. One is a 28-pin TSSOP with an exposed thermal pad (package type LP), and the other is a 28-pin wide-body SOIC (package type LW). Both package types are available in lead (Pb) free versions, with 100 % matte-tin leadframe plating(suffix T).
It has ten unique festures. The first one is it drives wide range of n-channel MOSFETs. The second one is charge pump to boost gate drive at low-battery-input conditions. The third one is bootstrapped gate drive with charge pump for 100% duty cycle.The forth one is synchronous rectification. The fifth one is fault diagnostic output. The sixth one is adjustable dead-time cross-conduction protection. The seventh one is motor lead short-to-battery and short-to-ground protection. The eigth one is undervoltage/overvoltage protection. The ninth one is -40°C to +150°C, TJ operation. The lasi one is thermal shutdown.
There are also some absolute maximum ratings about it. Load supply voltage range , VBB, VDRAIN , CPI is from -0.6 V to +40 V.Logic input/output voltage range is from -0.3 V to + 6.5 V. Operating temperature range is from -40 to +135 . Junction temperature is +150 . Storage temperature range is from -55 to +150 .
If you are willing to find more about 3940, please pay attention to our web! Thank you for being concerned of our information.