5STP 45Q2800

      The 5STP 45Q2800 is a kind of phase control thyristor. The following is about the features. First,it uses patented free-floating silicon technology.Secondly, it has low on-state and switching losses.Thirdly,it is designed for traction, energy and industrial applications.Fourthly,it has optimum power handling capability.At last,it has interdigitated amplifying gate.
      Here you can get some information about the maximum ratings of 5STP 45Q2800. The V_DSM is 2800 V.The I_TAVM is 5490 A.The I_TRMS is 8625 A.The I_TSM is 75000 A.The V_T0 is 0.86 V.The r_T is 0.070 mW.The V_DRM (V_RRM) is 2800 V at f = 50 Hz, t_p = 10ms.The V_RSM1 is 3000 V at t_p = 5 ms, single pulse.The I_DRM and the I_RRM are both lower than 400 mA at T_j = 125.The dV/dt_crit is 1000 V/s at Exp. to 0.67xV_DRM.The I_TAVM (Max. average on-state current) is 5490 A and the I_TRMS (Max. RMS on-state current) is 8625 A under the condition of half sine wave, T_C = 70.Under the condition that T_j = 125°C,V_D = V_R = 0 V (After surge),the I_TSM (Max. peak non-repetitive) is 75000 A at t_p = 10 ms and 79000 A at t_p = 8.3 ms;The I²t (Limiting load integral) is 28125 kA²s at tp = 10 ms and 25900 kA²s at t_p = 8.3 ms.The V_T (On-state voltage) is 1.29 V at I_T = 6000 A,T_j = 125.The V_T0 (Threshold voltage) is 0.86 V at I_T = 3000 - 9000 A,T_j = 125.The rT (Slope resistance) is 0.070 m at T_j = 125.The I_H (Holding current) is 40-100 mA at T_j = 25 and 20-75 mA at T_j = 125.The I_L (Latching current) is 100-500 mA at T_j = 25 and 150-350 mA T_j = 125.