6N137

Current Transfer Ratio :
Maximum Reverse Diode Voltage : 5 V
Minimum Operating Temperature : - 40 C
Maximum Power Dissipation : 100 mW
Package / Case : DIP-8
Packaging : Bulk
Maximum Input Diode Current : 50 mA
Maximum Operating Temperature : + 85 C
Maximum Baud Rate : 10 MBps
Maximum Forward Diode Voltage : 1.75 V


Features:

.Very high speed-10 MBit/s
.Superior CMR-10 kV/s
.Double working voltage-480V
.Fan-out of 8 over -40°C to +85°C
.Logic gate output
.Strobable output
.Wired OR-open collector
.U.L. recognized (File # E90700)




Application

.Ground loop elimination
. LSTTL to TTL, LSTTL or 5-volt CMOS
.Line receiver, data transmission
.Data multiplexing
.Switching power supplies
.Pulse transformer replacement
.Computer-peripheral interface




Pinout






Specifications

Parameter		Symbol	Value	Units
Storage Temperature		TSTG	-55 to +125	°C
Operating Temperature		TOPR	-40 to +85	°C
Lead Solder Temperature		TSOL	260 for 10 sec	°C
EMITTER DC/Average Forward Input Current	Single channel	IF	50	mA
	Dual channel (Each channel)		30
Enable Input Voltage Not to exceed V by more than 500 mVCC	Single channel	VE	5.5	V
Reverse Input Voltage	Each channel	VR	5.0	V
Power Dissipation	Single channel	PI	100	mW
	Dual channel (Each channel)		45
DETECTOR Supply Voltage		VCC(1 minute max)	7.0	V
Output Current	Single channel	IO	50	mA
	Dual channel (Each channel)		50
Output Voltage	Each channel	VO	7.0	V
Collector Output Power Dissipation	Single channel	PO	85	mW
	Dual channel (Each channel)		60

Description

The 6N137 is designed as one kind of small outline high CMR, high speed, logic gate optocouplers. It can be used in (1)isolated line receiver; (2)simplex/ multiplex data transmission; (3)computer-peripheral interface; (4)microprocessor system interface; (5)digital isolation for a/d, d/a conversion; (6)switching power supply; (7)instrument input/output isolation; (8)ground loop elimination; (9)pulse transformer replacement.

Features of the 6N137 are:(1)surface mountable;(2)very small, low profile JEDEC registered package outline;(3)compatible with infrared vapor phase reflow and wave soldering processes;(4)high speed: 10 Mbd;(5)LSTTL/TTL compatible;(6)low input current capability:5 mA;(7)guaranteed ac and dc performance over temperature:-40°C to 85°C;(8)recognized under the component program of U.L. (file No. E55361) for dielectric withstand proof test voltage of 2500 Vac, 1 minute.

The absolute maximum ratings of the 6N137 can be summarized as:(1)output collector voltage-Vo:7 V;(2)output collector power dissipation:85 mW;(3)output collector current-Io:50 mA;(4)supply voltage-Vcc (1 minute maximum):7 V;(5)reverse input voltage-VR:5 V;(6)forward input current-IF:20 mA;(7)operating temperature:-40°C to +85°C;(8)storage temperature:-55°C to +125°C.If you want to know more information such as the electrical characteristics about the 6N137,please download the datasheet in www.seekic.com or www.chinaicmart.com .

Parameters:

Technical/Catalog Information	6N137
Vendor	Lite-On Inc
Category	Isolators
Mounting Type	Through Hole
Package / Case	8-DIP
Voltage - Isolation	5000Vrms
Configuration	1, One Direction
Input Type	DC
Output Type	Open Collector
Data Rate	10Mbs
Current - Output / Channel	50mA
Packaging	Tube
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	6N137 6N137 160 1791 ND 1601791ND 160-1791