Features: · Wide supply voltage range from 0.8 V to 3.6 V· High noise immunity· Complies with JEDEC standards:· JESD8-12 (0.8 V to 1.3 V)· JESD8-11 (0.9 V to 1.65 V)· JESD8-7 (1.2 V to 1.95 V)· JESD8-5 (1.8 V to 2.7 V)· JESD8-B (2.7 V to 3.6 V)· ESD protection:· HBM JESD22-A114E Class 3A exceeds 5...
74AUP1G373: Features: · Wide supply voltage range from 0.8 V to 3.6 V· High noise immunity· Complies with JEDEC standards:· JESD8-12 (0.8 V to 1.3 V)· JESD8-11 (0.9 V to 1.65 V)· JESD8-7 (1.2 V to 1.95 V)· JESD...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

| Symbol | Parameter | Conditions | Min | Max | Unit |
| VCC | supply voltage port | -0.5 | +4.6 | V | |
| IIK | input clamping current | VI < 0 V | -50 | - | mA |
| VI | input voltage | [1] | -0.5 | +4.6 | V |
| IOK | output clamping current | VO > VCC or VO < 0 V | - | ±50 | mA |
| VO | output voltage | Active mode and Power-down mode[1] | -0.5 | +4.6 | V |
| IO | output current | VO = 0 V to VCC | - | ±20 | mA |
| ICC | supply current | - | 50 | mA | |
| IGND | ground current | -50 | - | mA | |
| Tstg | storage temperature | -65 | +150 | ||
| Ptot | total power dissipation | Tamb = -40 °C to +125 °C[2] | - | 250 | mW |
The 74AUP1G373 provides the single D-type transparent latch with 3-state output. While the latch-enable (LE) input is high, the Q output follows the data (D) input. When pin LE is LOW, the latch stores the information that was present at the D-input one set-up time preceding the HIGH-to-LOW transition of pin LE. When pin OE is LOW, the contents of the latch is available at the (Q) output. When pin OE is HIGH, the output goes to the high-impedance OFF-state. Operation of input pin OE does not affect the state of the latch.
Schmitt trigger action of the 74AUP1G373 at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V.
The 74AUP1G373 ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V.
The 74AUP1G373 is fully specified for partial power-down applications using IOFF.
The IOFF circuitry of the 74AUP1G373 disables the output, preventing the damaging backflow current through the device when it is powered down.