Purchase 74HCT1284, In-stock 74HCT1284 From SeekIC.
MFG:PHILIPS D/C:95+


Part Number: 74HCT1284
MFG: PHILIPS
D/C: 95+
Description: The 74HCT1284 parallel interface chip is designed to provide an asynchronous, 4-bit, bi-directional, parallel printe...
MFG:PHILIPS D/C:95+


MFG: PHILIPS
D/C: 95+
Description: The 74HCT1284 parallel interface chip is designed to provide an asynchronous, 4-bit, bi-directional, parallel printe...
The 74HCT1284 parallel interface chip is designed to provide an asynchronous, 4-bit, bi-directional, parallel printer interface for personal computers. Three additional lines are included to provide handshaking signals between the host and the peripheral. The part is designed to match IEEE 1284 standard.
The 4 transceiver pins (A/B 1-4) allow data transmission from the A bus to the B bus, or from the B bus to the A bus, depending on the state of the direction pin DIR.
The B bus and the Y5-Y7 lines have totem pole or open drain style outputs depending on the state of the high drive enable pin HD. The A bus only has totem pole style outputs. All inputs are TTL compatible with at least 400mV of input hysteresis at VCC = 5.0V.
| SYMBOL | PARAMETER | CONDITIONS | RATING | UNIT |
| VCC | DC supply voltage | 0.5 to +6.5 | V | |
| IIK | DC input diode current | V1 < 0 | ±20 | mA |
| VI | DC input voltage3 | 2 to +7.0 | V | |
| IOK | DC output diode current | VO < 0 | ±50 | mA |
| VOUT | DC output voltage3 | Output in Off or High state | 0.5 to +5.5 | V |
| IOUT | DC output current | Output in Low state | ±50 | mA |
| Tstg | Storage temperature range | 65 to 150 | °C | |
| ICC/IGND | Continuous current through VCC or GND | ±200 | mA |
74HCT1284
PDF/DataSheet Download








