Features: • 80C51 instruction set
• 8k * 8 ROM expandable externally to 64k bytes
• 256 * 8 RAM, expandable externally to 64k bytes
• Two standard 16-bit timer/counters
• An additional 16-bit timer/counter coupled to four capture registers and three compare registers
• Capable of producing eight synchronized, timed outputs
• An 8-bit ADC with eight multiplexed analog inputs
• Two 8-bit resolution, pulse width modulated outputs
• Five 8-bit I/O ports plus one 8-bit input port
shared with analog inputs
• Full-duplex UART compatible with the standard 80C51
• On-chip watchdog timer
• Three temperature ranges
0 to +70°C
40 to +85°C
40 to +125°CPinout
Specifications
| PARAMETER |
RATING |
UNIT |
| Voltage on any other pin to VSS |
0.5 to +6.5 |
V |
| Input, output DC current on any single I/O pin |
5.0 |
mA |
| Power dissipation (based on package heat transfer limitations, not device power consumption) |
1.0 |
W |
| Storage temperature range |
65 to +150 |
°C |
NOTES:
1. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any conditions other than those described in the AC and DC Electrical Characteristics section of this specification is not implied.
2. This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maxima.
3. Parameters are valid over operating temperature range unless otherwise specified. All voltages are with respect to VSS unless otherwise noted.
DescriptionThe 80C562/83C562 (hereafter generically referred to as 8XC562) Single-Chip 8-Bit Microcontroller is manufactured in an advanced CMOS process and is a derivative of the 80C51 microcontroller family. The 83C562/83C562 has the same instruction set as the 80C51.
The 8XC562 contains a non-volatile 256 * 8 read-only program memory, a volatile 256 * 8 read/write data memory (83C562) (the 80C562 is ROMless), a volatile 256 * 8 read/write data memory, six 8-bit I/O ports, two 16-bit timer/event counters (identical to the timers of the 80C51), an additional 16-bit timer coupled to capture and compare
latches, a 15-source, two-priority-level, nested interrupt structure, an 8-input ADC, two pulse width modulated outputs, standard 80C51 UART, a "watchdog" timer and on-chip oscillator and timing circuits. For systems that require extra capability, the 83C562 can be expanded using standard TTL compatible memories and logic.
8XC562 also functions as an arithmetic processor having facilities for both binary and BCD arithmetic plus bit-handling capabilities. The 8XC562 set consists of over 100 instructions: 49 one-byte, 45 two-byte and 17 three-byte. With a 12MHz crystal, 58% of the instructions are executed in 1ms and 40% in 2ms. Multiply and divide instructions require 4ms.
80C562 Data Sheet
