AAT3528

Features: • 1.2V to 5.5V Input voltage range• Operation down to 1.2V• Extremely low quiescent current: less than 2A• High accuracy detection threshold: ±1.5%• Monitor Power Supply Voltages• Fixed thresholds from 2.2V to 4.6V• Minimum 150ms reset pulse widt...

product image

AAT3528 Picture
SeekIC No. : 004261178 Detail

AAT3528: Features: • 1.2V to 5.5V Input voltage range• Operation down to 1.2V• Extremely low quiescent current: less than 2A• High accuracy detection threshold: ±1.5%• Monitor P...

floor Price/Ceiling Price

Part Number:
AAT3528
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/4/29

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• 1.2V to 5.5V Input voltage range
• Operation down to 1.2V
• Extremely low quiescent current: less than 2A
• High accuracy detection threshold: ±1.5%
• Monitor Power Supply Voltages
• Fixed thresholds from 2.2V to 4.6V
• Minimum 150ms reset pulse width with fast delay time <20s
• Debounced Manual Reset Input
• Available output configurations:
• Open-drain output
• CMOS active high output
• CMOS active low output
• Temp range -40 to 85°C
• 4 pin SOT143 package





Application

• Notebook Computers
• Cell Phones
• Portable Electronics
• Embedded Systems
• Intelligent Instruments





Pinout

  Connection Diagram




Specifications

SYMBOL Description Value UNIT
VCC VCC to GND -0.3 to 5.5 V
VMR MR to GND -0.3 to VCC+0.3 V
VRESET RESET to GND (Push-Pull Output) -0.3 to VCC+0.3 V
RESET to GND (Open Drain Output) -0.3 to 5.5
IVCC, IMR Maximum Continuous Input Current 20 mA
IRESET RESET/RESET Current 20 mA
dVcc/dt Rate of rise of VCC 100 V/s
TJ Operating Junction Temperature Range -40 to 150
TLEAD Maximum Soldering Temperature (at Leads) for 10s 300

Note: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. Functional operation at conditions other than the operating conditions specified is not implied. Only one Absolute Maximum rating should be applied at any one time.





Description

The AAT3526/7/8 PowerManager™ products are members of AATI's Total Power Management IC™ (TPMIC™) product family. These microprocessor reset circuits are ideal for monitoring voltage supplies in portable systems, where extended battery life is critical. They provide a low cost, reliable solution by eliminating external components. The AAT3526/7/8 products operate by monitoring the system power supply voltage. When the input voltage drops below a fixed threshold, the device asserts a reset signal for a minimum of 150ms after VCC has risen back above the fixed threshold. They are guaranteed to operate down to 1.2V and designed to ignore fast line transients appearing on VCC. The AAT3526/7/8 series is available with three output stage versions: AAT3526 push-pull active low output, AAT3527 push-pull active high output and AAT3528 open drain active low output.

The quiescent supply current is extremely low, typically 1A, making this device ideal for portable battery operated equipment. The AAT3526/7/8 are available in a 4 pin SOT143 package and are specified over -40° to 85°C operating temperature range.






Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Soldering, Desoldering, Rework Products
Optoelectronics
Power Supplies - Board Mount
Hardware, Fasteners, Accessories
Programmers, Development Systems
Line Protection, Backups
View more