MFG:N/A Package Cooled:NA/ D/C:09+
MFG: N/A
Package Cooled: NA/
D/C: 09+
Description: The ACS110 belongs to the AC line switch family built around the ASD™ concept. This high perform...
The ACS110 belongs to the AC line switch family built around the ASD™ concept. This high performance switch circuit is able to control a load up to 1 A.
The ACS™ switch embeds a high voltage clamping structure to absorb the inductive turn off energy and a gate level shifter driver to separate the digital controller from the main switch. It is triggered with a negative gate current flowing out of the gate pin.
|
Symbol |
Parameter |
Value |
Unit | ||
|
VDRM /VRRM |
Repetitive peak off-state voltage | Tj = 10 °C |
700 |
V | |
|
IT(RMS) |
RMS on-state current full cycle sine wave 50 to 60 Hz | SOT-223 | Ttab = 105 °C |
1 |
A |
| DIL-8 | Tlead = 110 °C |
1 |
A | ||
|
ITSM |
Non repetitive surge peak on-state current Tj initial = 25°C, full cycle sine wave |
F =50 Hz |
8 |
A | |
| F =60 Hz |
11 |
A | |||
|
I2t |
Fusing capability | tp = 10ms |
0.35 |
A2s | |
|
dI/dt |
Critical rate of rise of on-state current IG = 10mA, tr < 100ns | F = 120 Hz |
50 |
A/s | |
|
VPP |
Non repetitive line peak pulse voltage | note 1 |
2 |
KV | |
|
Tstg |
Storage temperature range |
-40 to +150 |
°C | ||
|
Tj |
Operating junction temperature range |
- 30 to + 125 |
°C | ||
|
Tl |
Maximum lead temperature for soldering during 10s |
260 |
°C | ||
ACS110-7SN
PDF/DataSheet Download
The ACS110 belongs to the AC line switch family built around the ASD™ concept. This high performance switch circuit is able to control a load up to 1 A.The ACS110 switch embeds a high voltage clamping structure to absorb the inductive turn off energy a...
The Intersil ACS10MS is a radiation hardened triple three-input NAND gate. A high on all inputs forces the output to a low state.The ACS10MS utilizes advanced CMOS/SOS technology to achieve high-speed operation. This device is a member of the radiation harde...
The Radiation Hardened ACS109MS is a Dual J-K Flip-Flop with Set and Reset. These Flip-Flops have independent J, K, Set, Reset, and Clock inputs andQ and Q outputs. The outputs change state on the positive-going transition of the clock. Set and Reset are acc...
IC AC SWITCH 0.8A 600V SOT-223
IC AC SWITCH 0.8A 600V TO-92
IC AC LINE SWITCH 600V TO-92
Price: 2-3 USD
Isolated can transceiver, SOP8, 150 ns Loop Delay, –27V to 40V Bus-Fault Protection
Price: 5-10 USD
Low-Cost, 2-Channel, ±14-Bit, 16-DIP, analog-to-digital converter, Two Differential Input Channels
Price: 12-15 USD
transceiver/framer, BGA, -0.3 to + 4.6 VDC
Price: 5-6 USD
rail-to-rail operational amplifier, 14-Lead PDIP, 3.3V, 75 kHz, 150μA, OP295G
Price: 0.5-1.1 USD
video decoder, 32-TQFP, 1.8V, tvp5150am1pbsr, Texas Instruments
Price: 5-6 USD
in-system programmable configuration PROM, 3.3V, 33 MHz, PLCC-20, XC18V01JC
Price: 10.6-11.5 USD
Field-Programmable Gate Array, QFP, –0.5 to 1.32 V, state-of-the-art Virtex-II technology
Price: 0.21-0.226 USD
8.0 A, Silicon Bridge Rectifier, DIP, 1000V, 8.0A, KBU810, SEP
Price: 150-180 USD
G150X1-L01 - TFT LCD Approval Specification CHIMEI
Price: 1-2 USD
IGBT-Module, 1600V, 1200A
Price: 0.3-0.5 USD
positive-OR gate, SOP, –0.5 to 6.5 V
Price: 1.33-1.36 USD
BGA144, 128Mbit GDDR SDRAM, 3.6 V, 50 mA, Burst type, Differential clock input
