AD587KR

Series: -
Number of Channels: 1
Mounting Type: Surface Mount
Operating Temperature: 0°C ~ 70°C
Package / Case: 8-SOIC (0.154", 3.90mm Width)
Packaging: Tube
Current - Output: 10mA
Reference Type: Series, Precision
Current - Cathode: -
Voltage - Output: 10V
Temperature Coefficient: 10ppm/°C
Tolerance: ±5mV
Manufacturer: Analog Devices Inc
Supplier Device Package: 8-SO
Voltage - Input: 13.5 V ~ 36 V
Current - Quiescent: 4mA


Features:

Laser Trimmed to High Accuracy:
10.000 V
5 mV (L and U Grades)
Trimmed Temperature Coefficient:
5 ppm/C Max (L and U Grades)
Noise Reduction Capability
Low Quiescent Current: 4 mA Max
Output Trim Capability
MIL-STD-883 Compliant Versions Available




Pinout






Specifications

+V_IN to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V
Power Dissipation (25°C) . . . . . . . . . . . . . . . . . . . . .500 mW
Storage Temperature . . . . . . . . . . . . . . . . .65°C to +150°C
Lead Temperature (Soldering, 10 sec) . . . . . . . . . . . . 300°C
Package Thermal Resistance
_JC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22°C/W
_JA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110°C/W
Output Protection: Output safe for indefinite short to ground and momentary short to +V_IN.




Description

The AD587 represents a major advance in state-of-the-art monolithic voltage references. Using a proprietary ion-implanted buried Zener diode and laser wafer trimming of high stability thin-film resistors, the AD587 provides outstanding performance at low cost.

The AD587 offers much higher performance than most other 10 V references. Because the AD587 uses an industry-standard pinout, many systems can be upgraded instantly with the AD587. The buried Zener approach to reference design provides lower noise and drift than band gap voltage references. The AD587 offers a noise reduction pin that can be used to further reduce the noise level generated by the buried Zener.

The AD587 is recommended for use as a reference for 8-, 10-, 12-, 14-, or 16-bit DACs that require an external precision reference. The device is also ideal for successive approximation or integrating ADCs with up to 14 bits of accuracy and, in general, can offer better performance than the standard on-chip references.

The AD587J, AD587K, and AD587L are specified for operation from 0°C to 70°C, and the AD587U is specified for 55°C to +125°C operation. All grades are available in 8-lead CERDIP. The J and K versions are also available in an 8-lead SOIC package for surface-mount applications, while the J, K, and L grades also come in an 8-lead PDIP.

Parameters:

Technical/Catalog Information	AD587KR
Vendor	Analog Devices Inc
Category	Integrated Circuits (ICs)
Reference Type	Series
Voltage - Output	10V
Tolerance	±5mV
Temperature Coefficient	10ppm/°C
Voltage - Input	13.5 ~ 36 V
Number of Channels	1
Current - Cathode	-
Current - Quiescent	4mA
Current - Output	10mA
Operating Temperature	0°C ~ 70°C
Package / Case	8-SOIC (3.9mm Width)
Packaging	Tube
Drawing Number	*
RoHS Status	RoHS Non-Compliant
Other Names	AD587KR AD587KR