DescriptionThe AD7118KN belongs to AD7118 family. The LOGDAC® AD7118 is a CMOS multiplying D/A converter which attenuates an analog input signal over the range 0 to 85.5 dB in 1.5 dB steps. The analog output is determined by a six-bit attenuation code applied to the digital inputs. Operating f...
AD7118KN: DescriptionThe AD7118KN belongs to AD7118 family. The LOGDAC® AD7118 is a CMOS multiplying D/A converter which attenuates an analog input signal over the range 0 to 85.5 dB in 1.5 dB steps. The ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The AD7118KN belongs to AD7118 family. The LOGDAC® AD7118 is a CMOS multiplying D/A converter which attenuates an analog input signal over the range 0 to 85.5 dB in 1.5 dB steps. The analog output is determined by a six-bit attenuation code applied to the digital inputs. Operating frequency range of the device is from dc to several hundred kHz. The device is manufactured using an advanced monolithic silicon gate thin-film on CMOS process and is packaged in a 14-pin dual-in-line package.
The features of AD7118KN can be summarized as (1)dynamic range 85.5 dB; (2)resolution 1.5 dB; (3)full 625 V input range multiplying DAC; (4)full military temperature range 558C to +1258C; (5)low distortion; (6)low power consumption; (7)latch proof operation (schottky diodes not required); (8)single 5 V to 15 V supply. It can be applicated in digitally controlled AGC systems; audio attenuators; wide dynamic range A/D converters; sonar systems; function generators.
The absolute maximum ratings((TA = +25°C unless otherwise noted)) of AD7118KN are (1)VDD (to DGND):+17 V; (2)VIN (to AGND) ± 35 V; (3)digital input voltage to DGND: 0.3 V to VDD + 0.3 V; (4)IOUT to AGND 0.3 V to VDD; (5)AGND to DGND 0 to VDD; (6)DGND to AGND 0 to VDD; (7)power dissipation (any package); (8)To +75°C 450 mW; (9)derates above +75°C by:6 mW/°C; (10)operating temperature range: commercial (K, L versions): 0°C to +70°C; industrial (B, C Versions): 25°C to +85°C;extended (T, U versions): 55°C to +125°C; (11)storage temperature: 65°C to +150°C; (12)lead temperature (soldering, 10 sec):+300°C(*Stresses above those listed under "Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.).