DescriptionThe ADA4320-1 is packaged in a RoHS-compliant, 24-lead exposed pad LFCSP and is rated for operation over the -40°C to +85°C temperature range. The ADA4320-1 accepts a differential or single-ended input signal. The ADA4320-1 has been tailored to address both the high output drive and str...
ADA4320-1: DescriptionThe ADA4320-1 is packaged in a RoHS-compliant, 24-lead exposed pad LFCSP and is rated for operation over the -40°C to +85°C temperature range. The ADA4320-1 accepts a differential or sing...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The ADA4320-1 is packaged in a RoHS-compliant, 24-lead exposed pad LFCSP and is rated for operation over the -40°C to +85°C temperature range. The ADA4320-1 accepts a differential or single-ended input signal. The ADA4320-1 has been tailored to address both the high output drive and stringent fidelity requirements of DOCSIS 3.0. The part is able to maintain excellent adjacent channel rejection performance over the full 5 MHz to 85 MHz range, even with multiple bonded channels at maximum specified output levels. For lifeline E-MTA applications, the ADA4320-1 output stage current can be throttled via SPI commands, reducing the power requirement for single-channel transmission by up to 30%. In transmit-disable mode, the ADA4320-1 draws only 12 mA. The output is specified for driving a single-ended 75 load through a 4:1 impedance transformer. The ADA4320-1 features an output driver stage that scales quiescent current consumption according to gain setting. In multichannel mode at maximum gain (32 dB), the device draws 260 mA from a single 5 V supply, enabling the high power, ultralow distortion performance required by multiple DOCSIS 3.0 upstream channels. The ADA4320-1 is a high power, ultralow distortion amplifier designed for CATV reverse channel line driving. Its features and specifications make the ADA4320-1 ideally suited for DOCSIS 3.0- and EuroDOCSIS 3.0-based applications. Both gain and output stage current are controlled via a 3-wire (SPI-compatible)interface. A single 8-bit serial word selects one of four available supply current presets and one of sixty gain codes. The device also features a full power-down sleep mode that further reduces current draw to12 A typical.
The features of ADA4320-1 can be summarized as (1)supports cableLabs- DOCSIS 3.0/2.0 and EuroDOCSIS; (2)3.0/2.0 specifications for customer premises equipment (CPE)upstream transmission 5 V single-supply operation; (3)excellent adjacent channel rejection performance -66 dBc ACPR for a single QPSK channel/-63 dBc ACPR for 4* QAM64 channels; (4)gain programmable in 1 dB steps over a 59 dB range gain range: -27 dB to +32 dB; (5)current-scaled output stage; (6)low between-burst output noise level -70 dB mV in 160 kHz bandwidth; (7)maintains constant output impedance in enable, disable, and sleep conditions; (8)selectable low power modes 12 mA in Tx disable/ 12 A in sleep mode (full power-down); (9)3-wire, SPI-compatible interface; (10)4 mm * 5 mm 24-lead LFCSP, RoHS compliant.
The absolute maximum ratings of ADA4320-1 are (1)supply voltage: 5.5 V; (2)maximum power dissipation: 1.65 W; (3)storage temperature range: -65°C to +125°C; (4)operating temperature range: -40°C to +85°C; (5)lead temperature (soldering, 10 sec): 300°C; (6)junction temperature: 150°C.