Purchase ADC0802, In-stock ADC0802 From SeekIC.
MFG:NS
Part Number: ADC0802
MFG: NS
Description: The ADC0801, ADC0802, ADC0803, ADC0804 and ADC0805 are CMOS 8-bit successive approximation A/D converters that use a di...
- Table of contents:
ADC0802
-
Suppliers
DataSheet
General Description
ADC0802 General Description
The ADC0801, ADC0802, ADC0803, ADC0804 and ADC0805 are CMOS 8-bit successive approximation A/D converters that use a differential potentiometric
ladder-similar to the 256R products. These converters are designed to allow operation with the NSC800 and INS8080A derivative control bus with TRI-STATE® output latches directly driving the data bus. These A/Ds appear like memory locations or I/O ports to the microprocessor and no interfacing logic is needed.
Differential analog voltage inputs allow increasing the common-mode rejection and offsetting the analog zero input voltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of resolution.
ADC0802 Maximum Ratings
Supply Voltage (VCC) (Note 3) 6.5V
Voltage
Logic Control Inputs −0.3V to +18V
At Other Input and Outputs −0.3V to (VCC+0.3V)
Lead Temp. (Soldering, 10 seconds)
Dual-In-Line Package (plastic) 260˚C
Dual-In-Line Package (ceramic) 300˚C
Surface Mount Package
Vapor Phase (60 seconds) 215˚C
Voltage
Logic Control Inputs −0.3V to +18V
At Other Input and Outputs −0.3V to (VCC+0.3V)
Lead Temp. (Soldering, 10 seconds)
Dual-In-Line Package (plastic) 260˚C
Dual-In-Line Package (ceramic) 300˚C
Surface Mount Package
Vapor Phase (60 seconds) 215˚C
ADC0802 Features
Compatible with 8080 µP derivatives-no interfacing logic needed - access time - 135 ns
Easy interface to all microprocessors, or operates "stand alone"
Differential analog voltage inputs
Logic inputs and outputs meet both MOS and TTL voltage level specifications
Works with 2.5V (LM336) voltage reference
On-chip clock generator
0V to 5V analog input voltage range with single 5V supply
No zero adjust required
0.3" standard width 20-pin DIP package
20-pin molded chip carrier or small outline package
Operates ratiometrically or with 5 VDC, 2.5 VDC,or analog span adjusted voltage reference
Easy interface to all microprocessors, or operates "stand alone"
Differential analog voltage inputs
Logic inputs and outputs meet both MOS and TTL voltage level specifications
Works with 2.5V (LM336) voltage reference
On-chip clock generator
0V to 5V analog input voltage range with single 5V supply
No zero adjust required
0.3" standard width 20-pin DIP package
20-pin molded chip carrier or small outline package
Operates ratiometrically or with 5 VDC, 2.5 VDC,or analog span adjusted voltage reference
ADC0802 Connection Diagram
ADC0802
PDF/DataSheet Download
- Datasheet: ADC0802
- File Size: 2975740 KB
- Manufacturer: NSC [National Semiconductor]
- Click here to Download
- ·ADC0800
- NSC [National Semiconductor]
- ADC0800 8-Bit A/D Converter
- 170168 KB
- ·ADC08004-1CD
- PHILIPS [Philips Semiconductors]
- CMOS 8-bit A/D converters
- 154399 KB
- ·ADC08004-1CN
- PHILIPS [Philips Semiconductors]
- CMOS 8-bit A/D converters
- 154399 KB
- ·ADC08004-1LCD
- PHILIPS [Philips Semiconductors]
- CMOS 8-bit A/D converters
- 154399 KB
- ·ADC08004-1LCN
- PHILIPS [Philips Semiconductors]
- CMOS 8-bit A/D converters
- 154399 KB
- ·ADC0800PCD
- NSC [National Semiconductor]
- ADC0800 8-Bit A/D Converter
- 170168 KB
- ·ADC0800PD
- NSC [National Semiconductor]
- ADC0800 8-Bit A/D Converter
- 170168 KB
- ·ADC0801
- NSC [National Semiconductor]
- 8-Bit uP Compatible A/D Converters
- 2975740 KB
ADC0802 Relative Products
ADC0801S040TS/C1:1
IC ADC 8BIT 40MSPS 20-SSOP
ADC0801LCN/NOPB
IC ADC 8BIT MPU COMPAT 20-DIP
ADC0801
The ADC0801, ADC0802, ADC0803, ADC0804 and ADC0805 are CMOS 8-bit successive approximation A/D converters that use a differential potentiometricladder-similar to the 256R products. These converters are designed to allow operation with the NSC800 and INS8080A...
ADC0800
The ADC0800 is an 8-bit monolithic A/D converter using P- channel ion-implanted MOS technology. It contains a high input impedance comparator, 256 series resistors and analog switches, control logic and output latches. Conversion is performed using a success...
ADB18PS
The ADB18PS combines a diode bridge and a clamping protection function. Integrated monolithically within a SMD package, this device allows space saving and greater reliability. It provides both rectification and protection for low power equipment directly su...
ADAV803ASTZ-REEL
IC CODEC AUDIO R-DVD 3.3V 64LQFP
Hotspot Suppliers Product
HEF4013BT
Price: 0.07-0.09 USD
Dual D-type flip-flop, SOP14, 14-lead SO, plastic, 7 to 14 MHz clock pulse frequency
P6SMB10CA
Price: 0.062-0.075 USD
Surface Mount TRANSZORB, Transient Voltage Suppressor, SMB, 5.0 W, Excellent clamping capability
AD620ANZ
Price: 2.2-2.2 USD
instrumentation amplifier, 8-PDIP, one external resistor
177908-6
Price: 0.25-0.3 USD
Power Double-Lock Connector, 2.5 mm, 2.5 SDL
S3C6410XH-66
Price: 15-18 USD
S3C6410XH-66, BGA, Samsung semiconductor
HCPL7800A
Price: 1-5 USD
high CMR isolation amplifier, DIP, 85 kHz Bandwidth, 15 kV/μs, Sigma-Delta A/D Converter
TMS320VC5510AZGWA2
Price: 10-15 USD
FIXED POINT DSP, 240-BGA, Digital Signal Processor (DSP), 3.3-V, DSP generation CPU processor core
OP113FSZ
Price: 0.22-2 USD
operational amplifier, SOP8, ±18 V
BCM5464SA1IRBG
Price: 53.5-56.5 USD
gigabit copper transceiver, 354-pin BGA, 10 KB, 750 mW, 4kV
FZT1047ATA
Price: 0.27-0.3 USD
transistor, SOT223, 35 V
C4532JB1E226M
Price: 0.25-0.5 USD
General Multilayer Ceramic Chip Capacitor, SMD, High capacitance, monolithic structure, Low residu...
BD4830FVE-TR
Price: 0.01-0.06 USD
voltage detector IC, -0.3 to +10 V, 210 mW
