Purchase ADC08831, In-stock ADC08831 From SeekIC.
Part Number: ADC08831
Description: The ADC08831/ADC08832 are 8-bit successive approximation Analog to Digital converters with 3-wire seri...
- Table of contents:
ADC08831
-
Suppliers
DataSheet
General Description
ADC08831 General Description
The ADC08831/ADC08832 are 8-bit successive approximation Analog to Digital converters with 3-wire serial interfaces and a configurable input multiplexer for 2 channels. The serial I/O will interface to COPS™family of micro-controllers, PLD's, microprocessors, DSP's, or shift registers. The serial I/O is configured to comply with the NSC MICROWIRE™ serial data exchange standard.
To minimize total power consumption, the ADC08831/ADC08832 automatically go into low power mode whenever they are not performing conversions. A track/hold function allows the analog voltage at the positive input to vary during the actual A/D conversion.
The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo differential modes. The voltage reference input can be adjusted to allow encoding of small analog voltage spans to the full 8-bits of resolution.
ADC08831 Maximum Ratings
Resolution: 8 bits
Conversion time (fC = 2 MHz): 4s (max)
Power dissipation: 8.5mW (typ)
Low power mode: 3.0mW (typ)
Single supply: 5VDC
Total unadjusted error: ±1LSB
No missing codes over temperature
Conversion time (fC = 2 MHz): 4s (max)
Power dissipation: 8.5mW (typ)
Low power mode: 3.0mW (typ)
Single supply: 5VDC
Total unadjusted error: ±1LSB
No missing codes over temperature
ADC08831 Features
3-wire serial digital data link requires few I/O pins
Analog input track/hold function
2-channel input multiplexer option with address logic
Analog input voltage range from GND to VCC
No zero or full scale adjustment required
TTL/CMOS input/output compatible
Superior pin compatible replacement for ADC0831/2
Analog input track/hold function
2-channel input multiplexer option with address logic
Analog input voltage range from GND to VCC
No zero or full scale adjustment required
TTL/CMOS input/output compatible
Superior pin compatible replacement for ADC0831/2
ADC08831 Typical Application
Digitizing sensors and waveforms
Process control monitoring
Remote sensing in noisy environments
Instrumentation
Embedded Systems
ADC08831 Connection Diagram
ADC08831
PDF/DataSheet Download
- Datasheet: ADC08831
- File Size: 485563 KB
- Manufacturer:
- Click here to Download
- ·ADC0800
- NSC [National Semiconductor]
- ADC0800 8-Bit A/D Converter
- 170168 KB
- ·ADC08004-1CD
- PHILIPS [Philips Semiconductors]
- CMOS 8-bit A/D converters
- 154399 KB
- ·ADC08004-1CN
- PHILIPS [Philips Semiconductors]
- CMOS 8-bit A/D converters
- 154399 KB
- ·ADC08004-1LCD
- PHILIPS [Philips Semiconductors]
- CMOS 8-bit A/D converters
- 154399 KB
- ·ADC08004-1LCN
- PHILIPS [Philips Semiconductors]
- CMOS 8-bit A/D converters
- 154399 KB
- ·ADC0800PCD
- NSC [National Semiconductor]
- ADC0800 8-Bit A/D Converter
- 170168 KB
- ·ADC0800PD
- NSC [National Semiconductor]
- ADC0800 8-Bit A/D Converter
- 170168 KB
- ·ADC0801
- NSC [National Semiconductor]
- 8-Bit uP Compatible A/D Converters
- 2975740 KB
ADC08831 Relative Products
ADC0854
The ADC0852 and ADC0854 are CMOS devices that combine a versatile analog input multiplexer, voltage compara- tor, and an 8-bit DAC which provides the comparator's threshold voltage (VTH). The comparator provides a ''1-bit'' output as a result of a comparison...
ADC0852
The ADC0852 and ADC0854 are CMOS devices that combine a versatile analog input multiplexer, voltage compara- tor, and an 8-bit DAC which provides the comparator's threshold voltage (VTH). The comparator provides a ''1-bit'' output as a result of a comparison...
ADC0851
The ADC0851 and ADC0858 are 2 and 8 input analog data acquisition systems. They can function as conventional multiple input A/D converters, automatic scanning A/D converters or programmable analog ``watchdog'' systems. In ``watchdog'' mode they monitor analo...
ADC08500DEV/NOPB
BOARD DEV FOR ADC08D500
ADC08500CIYB/NOPB
ADC 8BIT 500MSPS LP 128-LQFP
ADC08500
The ADC08500 is a low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 500 MSPS. Consuming a typical 0.8 Watts at 500 MSPS from a single 1.9 Volt supply, this device is guaranteed to...
Hotspot Suppliers Product
CL-PD6710-VC-B
Price: 1-100 USD
CLPD6710VCB CIRRUS LOGIC ISA TO PC CARD HOST ADAPTERS
BT860KRF
Price: 4-4.5 USD
BT860KRF - Multiport YCrCb to NTSC / PAL / SECAM Digital Video Encoder - Conexant Systems, Inc
AXK7L34227G
Price: 0.28-0.3 USD
a narrow-pitch connector, cellular Socket Header phone, DVD, DSC
CBS2002424
Price: 60-75 USD
power module , total power 201.6 W
MC14569BAL
Price: 23.55-25.55 USD
programmable divide-by-N dual, 4-bit, binary or BCD down counter, –0.5 to +18.0 V, ±10 mA, DIP
ADC0804LCN
Price: 2.3-2.5 USD
CMOS, 8-bit, A/D converter
PCM1808PWR
Price: 3-10 USD
24BIT, 96KHZ, 14-TSSOP, high-performance, low-cost, single-chip, stereo analog-to-digital converter
MAX9075EXK
Price: 0.8-1 USD
Low-Cost, Ultra-Small, 3uA, Single-Supply Comparators, SOC70-5, +6V
IR2110
Price: 0.1-0.2 USD
power MOSFET, IGBT driver, DIP, -0.3 to 525 V, high pulse current buffer stage
MT47H16M16BG-37E
Price: 2.45-2.8 USD
SDRAM, BGA, –1.0 to 2.3 V, –5 to 5 μA, RoHS-compliant, 4n-bit prefetch architecture
MAX9700BETB
Price: 0.5-0.6 USD
IC AMP AUDIO 1.6W MONO D 10TDFN - MAX9700BETB
EF68B50P
Price: 5-7 USD
programmable subsystem component, DIP-24, -0.3 to 7.0 V, fully TTL compatible
