Features: *Single power supply *750 ps propagation delay input to output *100 ps propagation delay dispersion *Differential PECL compatible outputs *Differential latch control *Internal latch pull-up resistors *Power supply rejection greater than 70 dB *750 ps minimum pulse width *Equivalent input...
ADCMP551: Features: *Single power supply *750 ps propagation delay input to output *100 ps propagation delay dispersion *Differential PECL compatible outputs *Differential latch control *Internal latch pull-u...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Rating |
SUPPLY VOLTAGES Input Supply Voltage (VCCI to GND) Output Supply Voltage (VCCO to GND) Positive Supply Differential |
−0.5 V to +6.0 V |
INPUT VOLTAGES Input Voltage Differential Input Voltage Input Voltage, Latch Enable |
−0.5 V to +3.5 V −4.0 V to +4.0 V −0.5 V to +5.5 V |
OUTPUT CURRENT Output Current |
30 mA |
TEMPERATURE Operating Temperature, Ambient Operating Temperature, Junction Storage Temperature Range |
−40°C to +85°C 125°C −65°C to +150°C |
The ADCMP551/ADCMP552/ADCMP553 are single supply, high speed comparators fabricated on Analog Devices proprietary XFCB process. The devices feature a 750 ps propagation delay with less than 150 ps overdrive dispersion. Dispersion, a measure of the difference in propagation delay under differing overdrive conditions, is a particularly important haracteristic of high speed comparators. A separate programmable hysteresis pin is available on the ADCMP552.
A differential input stage of ADCMP551 permits consistent propagation delay with a common-mode range from 0.2 V to VCCI 2.0 V. Outputs are complementary digital signals are fully compatible with PECL 10 K and 10 KH logic families. The outputs provide sufficient drive current to directly drive transmission lines terminated in 50 Ω to VCCO − 2 V. A latch input is included and permits tracking, track-and-hold, or sample-and-hold modes of operation. The latch input pins contain internal pull ups that set the latch in tracking mode when left open.
The ADCMP551/ADCMP552/ADCMP553 are specified over the 40°C to +85°C industrial temperature range. The ADCMP551 is available in a 16-lead QSOP package; the ADCMP552 is available in a 20-lead QSOP package; and the ADCMP553 is available in an 8-lead MSOP package.