ADG601

Features:

Low On Resistance 2.5
Max
<0.6
On Resistance Flatness
Dual 2.7 V to 5.5 V or Single 2.7 V to 5.5 V Supplies
Rail-to-Rail Input Signal Range
Tiny 6-Lead SOT-23 and 8-Lead Micro-SOIC Packages
Low Power Consumption
TTL/CMOS-Compatible Inputs

APPLICATIONS
Automatic Test Equipment
Power Routing
Communication Systems
Data Acquisition Systems
Sample and Hold Systems
Avionics
Relay Replacement
Battery-Powered Systems


Specifications

(T_A = 25°C unless otherwise noted)
V_DD to V_SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 V
V_DD to GND . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to +6.5 V
V_SS to GND . . . . . . . . . . . . . . . . . . . . . . . . . . +0.3 V to 6.5 V
Analog Inputs² . . . . . . . . . . . . . . . . . VSS 0.3 V to VDD +0.3 V
Digital Inputs² . . . . . . . . . . . . . . . . . . . . 0.3 V to VDD +0.3 V
or 30 mA, whichever occurs first
Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . 100 mA
Peak Current, S or D
(Pulsed at 1 ms, 10% Duty Cycle Max) . . . . . . . . . 200 mA
Operating Temperature Range
Industrial (B Version) . . . . . . . . . . . . . . . 40°C to +85°C
Storage Temperature Range . . . . . . . . . . . 65°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Micro-SOIC Package
_JA Thermal Impedance . . . . . . . . . . . . . . . . . . . . 206°C/W
_JC Thermal Impedance . . . . . . . . . . . . . . . . . . . . . 44°C/W
SOT_23 Package
_JA Thermal Impedance . . . . . . . . . . . . . . . . . . 229.6°C/W
_JC Thermal Impedance . . . . . . . . . . . . . . . . . . 91.99°C/W
Lead Temperature, Soldering (10 seconds) . . . . . . . . . 300°C
IR Reflow, Peak Temperature . . . . . . . . . . . . . . . . . . . 220°C
NOTES
¹Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Only one absolute maximum rating may be applied at any one time.
²Overvoltages at IN, S, or D will be clamped by internal diodes. Current should be limited to the maximum ratings given.


Description

The ADG601/ADG602 are monolithic CMOS SPST (Single Pole, Single Throw) switches with On Resistance typically less than 2.5 . The Low On Resistance flatness makes the ADG601/ ADG602 ideally suited to many applications, particularly those requiring low distortion. These switches are ideal for replacements
for mechanical relays because they are more reliable, have ower power requirements, and package size is much smaller.

The ADG601/ADG602  is a normally open (NO) switch, while the ADG602 is normally closed (NC). Each switch conducts equally well in both directions when ON, with the input signal range extending to the supply rails. They are available in tiny 6-lead SOT-23 and 8-lead Micro- SOIC packages.