ADG752

VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to +6 V
Analog, Digital Inputs2 . . . . . . . . . 0.3 V to VDD +0.3 V or
                                                  30 mA, Whichever Occurs First
Peak Current, S or D . . . . . . . . . . . . . . . . . . . . . .  . .100 mA
(Pulsed at 1 ms, 10% Duty Cycle Max)
Continuous Current, S or D . . . . . . . . . . . . . . . . . . . . 30 mA
Operating Temperature Range
  Industrial (B Version) . . . . . . . . . . . . . .. 40°C to +85°C
Storage Temperature Range . . . . . . . . . 65°C to +150°C
Power Dissipation . . . . . . . . . . . . . . . . . . . . (TJ MaxTA)/qJA
Junction Temperature (TJ Max) . . . . . . . . . . .   . . . . .+150°C
mSOIC Package
  qJA Thermal Impedance . . . . . . . . . . . . . . . . . . . . 206°C/W
  qJC Thermal Impedance . . . . . . . . . . . . . . . . . . . . . 44°C/W
SOT-23 Package
  qJA Thermal Impedance . . . . . . . . . . . . . . . . . . . 229.6°C/W
  qJC Thermal Impedance . . . . . . . . . . . . . . . . .. .  91.99°C/W
Lead Temperature, Soldering
  Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . .+215°C
  Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . ..+220°C
NOTES
1Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Only one absolute maximum rating may be applied at any one time.
2Overvoltages at IN, S or D will be clamped by internal diodes. Current should be limited to the maximum ratings given.

The ADG752 is a low voltage SPDT (single pole, double throw) switch. It is constructed using switches in a T-switch configuration, which results in excellent Off Isolation while maintaining good frequency response in the ON condition. High off isolation and wide signal bandwidth make this part of ADG752 be suitable for switching RF and video signals.

Low power consumption and operating supply range of +1.8 V to +5.5 V make it ideal for battery powered, portable instruments. The ADG752 is designed on a submicron process that provides low power dissipation yet gives high switching speed and low on resistance.

This part is a fully bidirectional switch and can handle signals up to and including the supply rails. Break-before-make switching action ensures the input signals are protected against momentary shorting when switching between channels. The ADG752 is available in 6-lead SOT-23 and 8-lead mSOIC packages.