ADM5170

The ADM5170 is an octal line driver suitable for digital communication systems with data rates up to 116 kB/s. Input TTL or CMOS signal levels are inverted and translated into either EIARS-232E or RS-423A signal levels depending on the status of the Mode Select inputs MS+ and MS. With both Mode Select inputs at GND, RS-423 operation is selected while with MS+ connected to VDD and MS connected to VSS, RS-232 operation is selected.

Features of the ADM5170 are:(1)eight single ended line drivers in one package; (2)meets eia standard rs-232e, rs-423a and ccitt v.10/x.26; (3)resistor programmable slew rate; (4)wide supply voltage range; (5)low power cmos; (6)3-state outputs; (7)ttl/cmos compatible inputs; (8)output short circuit protection; (9)available in 28-pin dip/plcc; (10)low power replacement for uc5170c.

The absolute maximum ratings of the ADM5170 can be summarized as:(1)VDD: +15 V; (2)VSS :15 V; (3)Input Voltages; (4)VIN :0.3 to (VDD + 0.3 V); (5)Ouput VoltagesVOUT:12 V to +12 V; (6)Output Short Circuit Duration :Continuous; (7)Power Dissipation Plastic DIP (Derate at 12.5 mW/°C above +50°C):1250 mW; (8)Thermal Impedance: 75°C/W; (9)Power Dissipation PLCC :1000 mW; (10)(Derate at 10 mW/°C above +50°C); (11)qJA, Thermal Impedance:80°C/W; (12)Operating Temperature Range; (13)Commercial (J Version) : 0°C to +70°C; (14)Industrial (A Version) : 40°C to +85°C; (15)Lead Temperature (Soldering 10 sec) :+300°C; (16)Vapour Phase (60 sec) :+215°C; (17)Infrared (15 sec) :+220°C.If you want to know more information such as the electrical characteristics about the ADM5170, please download the datasheet in www.seekic.com or www.chinaicmart.com.