ADM6995

Features: • Supports five10M/100M auto-detect Half/Full duplex switch ports with TX/F Xinterfaces.• Supports 2048 MAC addresses table.• Supports four queue for QoS• Supports priority features by Port-Based, 802.1p VLAN & IP TOS of packets.• Supports Store & Fo...

product image

ADM6995 Picture
SeekIC No. : 004275969 Detail

ADM6995: Features: • Supports five10M/100M auto-detect Half/Full duplex switch ports with TX/F Xinterfaces.• Supports 2048 MAC addresses table.• Supports four queue for QoS• Supports ...

floor Price/Ceiling Price

Part Number:
ADM6995
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/4/24

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Supports five10M/100M auto-detect Half/Full duplex switch ports with TX/F Xinterfaces.
• Supports 2048 MAC addresses table.
• Supports four queue for QoS
• Supports priority features by Port-Based, 802.1p VLAN & IP TOS of packets.
• Supports Store & Forward architecture and performs forwarding and filtering at non
   -blocking full wire speed.
• Supports buffer allocation with 256 bytes per block
• Supports Aging function Enable/Disable.
• Supports per port Single/Dual color mode with Power On auto diagnostic.
• Supports 802.3x Flow Control pause packet for Full Duplex in case buffer is full.
• Supports Back Pressure function for Half Duplex operation in case buffer is full.
• Supports packet length up to 1522 bytes.
• Broadcast Storming Filter function.
• Supports 802.1Q VLAN. Up to 16 VLAN groups is implemented by the last four bits of VLAN ID.
• 2bit MAC clone to support multiple WAN application
• Supports TP interface Auto MDIX function for auto TX/RX swap by strapping-pin.
• Easy Management 32bits smart counter for per port RX/TX byte/packet count, error count and collision count.
• Support PHY status output for management system.
• 25M Crystal only for the whole system.
• 128 QFP package with 0.18um technology. 1.8V/3.3V power supply.
 
 
 


Application

• Port Configuration: Speed, Duplex, Flow Control Capability andTag/ Untag.
• VLAN & TOS Priority Mapping
• Broadcast Storming rate and Trunk.
• Fiber Select, Auto MDIX select
• VLAN Mapping
• Per Port Buffer number




Pinout

  Connection Diagram


Specifications

Symbol Parameter Rating Units
Vcc Power Supply -0.3 to 3.63 V
Vcca2 TX line driver 1.8 V
Vccpll PLL voltae
1.8 V
Vccik Digital core voltage 1.8 V
Vin Input Voltage -0.3 to VCC+ 0.3 V
Vout Output Voltage -0.3 to VCC+ 0.3 V
TSTG Storage Temperature -55 to 155
PD Power Dissipation 1.3W W
ESD ESD Rating 2KV V



Description

The ADM6995L integrates five 100Base-X physical sub-layer (PHY), 100Base-TX physical medium dependent (PMD) transceivers, five complete 10Base-T m odules and memory into a single chip for both 10Mbits/s, 100Mbits/s Ethernet switch operation. It also supports 100Base-FX operation through external fi ber-optic transceivers.
The ADM6995L  is capable of operating in either Full Duplex mode or Half-Duplex mode in 10Mbits/s and 100Mbits/s. Operational modes can be selected by hardware configuration pins, software settings of management registers, or determned by the on-chip auto negotiation logic. 
 




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Tapes, Adhesives
803
Connectors, Interconnects
Programmers, Development Systems
Optoelectronics
Isolators
Prototyping Products
DE1
View more