Features: ·Monitors up to 5 voltages·Controls and monitors up to 4 fans·High and low frequency fan drive signal·1 on-chip and 2 remote temperature sensors·Series resistance cancellation on the remote channel·Extended temperature measurement range up to 191°C·Automatic fan speed control mode contro...
ADT7476: Features: ·Monitors up to 5 voltages·Controls and monitors up to 4 fans·High and low frequency fan drive signal·1 on-chip and 2 remote temperature sensors·Series resistance cancellation on the remot...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter | Rating |
Positive Supply Voltage (VCC) Maximum Voltage on +12VIN Pin Maximum Voltage on +5VIN Pin Maximum Voltage on All Open-Drain Outputs Voltage on Any Input or Output Pin Input Current at Any Pin Package Input Current Maximum Junction Temperature (TJ max) Storage Temperature Range Lead Temperature, Soldering IR Reflow Peak Temperature Pb-free Peak Temperature Lead Temperature (Soldering, 10 sec) ESD rating |
3.6 V 16 V 6.25V 3.6 V −0.3 V to +4.2 V ±5 mA ±20 mA 150°C −65°C to +150°C 220°C 260°C 300°C 1,500 V |
The ADT7476 dBCOOL controller is a thermal monitor and multiple PWM fan controller for noise-sensitive or power-sensitive applications requiring active system cooling. The ADT7476 can drive a fan using either a low or high frequency drive signal, monitor the temperature of up to two remote sensor diodes plus its own internal temperature, and measure and control the speed of up to four fans, so they operate at the lowest possible speed for minimum acoustic noise.
The automatic fan speed control loop optimizes fan speed for a given temperature. The effectiveness of the system's thermal solution can be monitored using the THERM input. The ADT7476 also provides critical thermal protection to the system using the bidirectional THERM pin as an output to prevent system or component overheating.