AH-9

Features:






Specifications






Description

      This is the description about AH-9 of the 5 to 500 MHz, TO-8 cascadable Amplifer.
      Here are the features of AH-9. The high input is 23 dB.  The third order is 35 dB.
      The absolute maximum ratings and electrical specifications of AH-9 are these, measured in a 50 ohm system at 15 Vdc nominal. The frequency (MHZ Min) is from 5 to 500 (typical) and is from 5 to 500 (guaranteed) and is from 5 to 500 (specifications). The small signal gain (dB Min) is 12 (typical), 11 (guaranteed), 10.5 (specifications). The gain flatness (dB Max) is ±0.3 (typical), ±1 (guaranteed), ±1.0 (specifications). The noise figure (dB Max) is 6 (typical), 8 (guaranteed), 8.5 (specifications). The power output @ 1dB compression (dB Min) is 23 (typical) and is 22 (guaranteed) and is 20 (specifications). The two tone 3rd order intercept point (dB Min) is 35.0 (typical), 33.0 (guaranteed), 30.0 (specifications). The two tone 2nd order intercept point (dB Min) is 47 (typical), 45 (guaranteed), 40 (specifications). The two tone 2nd harmonic intercept point (dB Min) is 52 (typical), 50(guaranteed), 45 (specifications). The input VSWR is <2.0:1 (typical), 2.0:1 (guaranteed), 2.0:1 (specifications). The output VSWR is <2.0:1 (typical), 2.0:1 (guaranteed), 2.0:1 (specifications). The DC current at 24V (mA Max.) is 110.0 (typical), 121.0 (guaranteed), 127.0 (specifications). The ambient operating temperature is from -54°C to 71°C. The storage temperature is from -65°C to 125°C. The maximum case temperature is 80°C . The maximum DC voltage is 25.0V. The maximum continuous RF input power is 15 dBm. The maximum short term RF input power is 10.0 mV (one minute Max.).
      At present there is not too much information about AH-9. If you are willing to find more about the AH-9, please pay attention to our web! We will promptly update the relevant information. You can find it in www.ChinaICMart.com or www.seekic.com. Welcome to contact with us.