AM26LS32AI

Features:

AM26LS32A Devices Meet or Exceed the Requirements of ANSI TIA/EIA-422-B,TIA/EIA-423-B, and ITU Recommendations V.10 and V.11
AM26LS32A Devices Have ±7-V Common-Mode Range With ±200-mV Sensitivity
AM26LS33A Devices Have ±15-V Common-Mode Range With ±500-mV Sensitivity
Input Hysteresis . . . 50 mV Typical
Operate From a Single 5-V Supply
Low-Power Schottky Circuitry
3-State Outputs
Complementary Output-Enable Inputs
Input Impedance . . . 12 kΩ Min
Designed to Be Interchangeable With Advanced Micro Devices AM26LS32^TMand AM26LS33^TM


Pinout




Specifications

Supply voltage, V_CC (see Note 1)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, V_I: Any differential input   . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . ±25 V
                            Other inputs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . . . . . . . 7 V 
Differential input voltage, V_ID (see Note 2)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 V
Continuous total power dissipation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . See Dissipation Rating Table
Package thermal impedance, _JA (see Note 3): D package . . . . . . . . . . . . . .. . . .  . . . . . . . . . . . . . . . . . . . .  73°C/W
                                                                           N package . . . . . . . . . . . . . . . . . . . . ... . . . . . . . . . . . . . . . . .67°C/W  
                                                                           NS package  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64°C/W
Case temperature for 60 seconds, T_C: FK package   . . . . . . . . . . . . . . . . . . . . . . . .. . .  . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or N package   . . . .. . . . . .  . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package  . . . . . . . . . . . . . . . .. . . . . . . . . . . 300°C
Storage temperature range, T_stg   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . 65°C to 150°C


Description

The AM26LS32AI and AM26LS33A devices are quadruple differential line receivers for balanced and unbalanced digital data transmission. The enable function is common to all four receivers
and offers a choice of active-high or active-low input. The 3-state outputs permit connection directly to a bus-organized system. Fail-safe design ensures that, if the inputs are open, the
outputs always are high.
Compared to the AM26LS32 and the AM26LS33, the AM26LS32A and AM26LS33A incorporate an additional stage of amplification to improve sensitivity. The input impedance has been increased, resulting in less loading of the bus line. The additional stage has increased propagation delay; however, this does not affect interchangeability in most applications.
The AM26LS32AC and AM26LS33AC are characterized for operation from 0°C to 70°C. The AM26LS32AI is characterized for operation from 40°C to 85°C. The AM26LS32AM and AM26LS33AM are characterized for operation over the full military temperature range of 55°C to 125°C.