IC FLASH MEM 2MEG 150NS 32PLCC
AM28F020-150JC: IC FLASH MEM 2MEG 150NS 32PLCC
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe AM28F020-200JC is one member of the AM28F020 family which is designed as the 2 mega...
PinoutDescriptionThe AM28F512-120JC is designed as one kind of 512 Kilobit (64 K x 8-Bit) CMOS 12....
The AM28F020-150JC is designed as a 2 megabit flash memory organized as 256 Kbytes of 8 bits each. AMD's flash memories offer the most cost-effective and reliable read/write non-volat ile random access memory. The Am28F020 is packaged in 32-pin PDIP, PLCC, and TSOP versions. It is designed to be reprogrammed and erased in-system or in standard EPROM programmers.
AM28F020-150JC has twelve features. (1)High performance. (2)CMOS low power consumption. (3)Compatible with JEDEC-standard byte-wide 32-pin EPROM pinouts. (4)10,000 write/erase cycles minimum. (5)Write and erase voltage 12.0V±5%. (6)Latch-up protected to 100mA from -1V to Vcc+1V. (7)Flasherase electrical bulk chip erase. (8)Flashrite programming. (9)Command register architecture for microprocessor /microcontroller compatible write interface. (10)On-chip address and data latches. (11)Advanced CMOS flash memory technology. (12)Automatic write/erase pulse stop timer. Those are all the main features.
Some absolute maximum ratings of AM28F020-150JC have been concluded into several points as follow. (1)Its storage temperature range would be from -65°C to 125°C. (2)Its ambient temperature with power applied would be from -55°C to 125°C. (3)Its voltage with respect to ground all pins except A9 and Vpp would be from -2.0V to 7.0V. (4)Its A9, Vpp voltage with respect to ground would be from -2.0V to 14V. (5)Its output short circuit current would be 200mA. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.
Also some AM28F020-150JC electrical characteristics are concluded as follow. (1)Its input leakage current would be max +/-1.0uA. (2)Its output leakage current would be max +/-1.0uA. (3)Its Vcc standby current would be typ 0.2mA and max 1.0mA. (4)Its Vcc active read current would be typ 20mA and max 30mA. (5)Its Vcc programming current would be typ 20mA and max 30mA. (6)Its Vcc erase current would be typ 20mA and max 30mA. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!
Technical/Catalog Information | AM28F020-150JC |
Vendor | AMD |
Category | Integrated Circuits (ICs) |
Other Names | AM28F020 150JC AM28F020150JC |