APA4835

Features:

• Operating Voltage : 3.3V to 5V
• Stereo switchable bridged/single-ended power amplifiers
• DC Volume Control Interface , 0dB to 105dB
• Low Supply Current , IDD = 13mA at Stereo BTL
• Low Shutdown Current , IDD = 0.7A
• Bridge-Tied Load (BTL) or Single-Ended-(SE) Modes Operation
• Output Power at 1% THD+N , VDD=5V
    2.2W/Ch (typ) into a 3 Load
    2.0W/Ch (typ) into a 4 Load
     1.2W/Ch (typ) into a 8 Load
• Output Power at 10% THD+N , VDD=5V
    2.8W/Ch (typ) into a 3 Load
    2.3W/Ch (typ) into a 4 Load
     1.5W/Ch (typ) into a 8 Load
• Single-ended mode at 1.0% THD+N
    95mW/Ch (typ) into 32 Load
• Depop Circuitry Integrated
• System Beep Detect
• Thermal shutdown protection circuitry
• High supply voltage ripple rejection
• Low Crossover Distortion
• PC99 Compliant
• 28-pin TSSOP-P (with enhanced thermal pad) power package available


Application

• Notebook and Desktop Computers
• Multimedia Monitors
• Portable Applications


Specifications

Symbol	Parameter	Rating	Unit
VDD	Supply Voltage Range	6	V
TA	Operating Ambient Temperature range	-40 to 85	°C
TJ	Maximum Junction Temperature	Internally limited*1	°C
TSTG	Storage Temperature Range	-65 to +150	°C
TS	Soldering Temperature , 10 seconds	260	°C
VESD	Electrostatic Discharge	-2000 to 2000*2	V

Description

The APA4835 is a monolithic integrated circuit , which provides DC volume control , and a stereo bridged audio power amplifiers capable of producing 2.8W (2.2W) into 3 with less than 10% (1.0%) THD+N. APA4835 includes a DC volume control , stereo bridge-tied and single-ended audio power amplifiers , stereo docking outputs , and a selectable gain control , that makes it optimally fittable for notebook PC , multimedia monitors , and other portable applications. The attenuator range of the volume control in APA4835 is from 0dB (DC_Vol=0.7VDD) to 105dB (DC_Vol=0V) with 32 steps. Both of the depop circuitry and the thermal shutdown protection circuitry are integrated in APA4835 , that reduces pops and clicks noise during power up or shutdown mode operation , and protects the chip from being destroyed by over temperature failure. To simplify the audio system design , APA4835 combines a stereo bridge-tied loads (BTL) mode for speaker drive and a stereo single-end (SE) mode for headphone drive into a single chip , where both modes are easily switched by the SE/BTL input control pin signal. Besides the low supply current design to increase the efficiency of the amplifiers , APA4835 also features a shutdown function which keeps the supply current only 0.7A (typ).