ASDX

Supply Voltage (Vs)*                                                    4.75V to 5.25Vdc
Maximum Supply Voltage*                                              6.50 Vdc (max.)
Consumption Current                                                              6 mA (typ)
Output Current - sink                                                            2 mA (max.)
Output Current - source                                                        2 mA (max.)
Lead Temperature (2-4 Sec.)                                                        250°C

This ASDX series is an amplified version of SenSym ICT's proven performer and industry leading SDX series sensor.  This amplified ASDX device is in a package with the slightly larger footprint as the SDX but it offers a high level (4.0 V span) output on a very cost effective basis. This family is fully calibrated and temperature compensated using an on-board ASIC. These sensors are intended for use with non-corrosive, non-ionic working fluids; such as air and dry gases.

Devices are available to measure absolute,differential, and gage pressures from 1 psi (ASDX01DN) through 100 psi (ASDX100). The absolute devices have an internal vacuum reference and an output voltage proportional to absolute pressure. Differential devices allow application of pressure to either side of the sensing diaphragm and can be used for gage or differential measurements.

All ASDX devices are accurate to within +/- 2.0%.The devices are characterized for operation from a single 5 volt supply. The sensor is designed and manufactured according to standards laid down in ISO 9001.

Contact your local SenSym ICT ASDX representative or the factory for additional details.