AT24C64N-10SI-2.7

Maximum Operating Temperature : + 85 C
Mounting Style : SMD/SMT
Package / Case : SOIC-8
Data Retention : 100 Years
Maximum Operating Current : 3 mA
Operating Supply Voltage : 3.3 V, 5 V
Memory Size : 64 Kbit
Organization : 8 K x 8
Maximum Clock Frequency : 0.1 MHz


Pinout




Description

The AT24C64N-10SI-2.7 is designed as 2-wire serial EEPROM which provides 65,536 bits of serial electrically erasable and programmable read only memory (EEPROM) organized as 8192 words of 8 bits each. The device's cascadable feature allows up to 8 devices to share a common 2-wire bus. The device is optimized for use in many industrial and commercial applications where low power and low voltage operation are essential.

AT24C64N-10SI-2.7 has many features. (1)Low voltage and stansard voltage operation. (2)Low power devices (ISB=2mA at 5.5V) available. (2)Internally organized 8192x8. (3)2-wire serial interface. (4)Schmitt trigger, filtered inputs for noise suppression. (5)Bidirectional data transfer protocol. (6)100kHz (1.8V, 2.5V, 2.7V) and 400kHz (5V) compatibility. (7)Write protect pin for hardware data protection. (8)32-byte page write mode (partial page writes allowed). (9)Self-timed write cycle (10ms max). (10)High reliability. And so on.

Some absolute maximum ratings have been concluded into several points of AT24C64N-10SI-2.7 as follow. (1)Its operating temperature range would be from -55°C to 125°C. (2)Its storage temperature range would be from -55°C to 150°C. (3)Its voltage on any pin with respectto ground would be from -1.0V to 7.0V. (4)Its maximum operating voltage would be 6.25V. (5)Its DC output current would be 5.0mA. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of AT24C64N-10SI-2.7 are concluded as follow. (1)Its supply voltage would be min 1.8V and max 5.5V for Vcc1. (2)Its supply current read at 100kHz would be typ 0.4mA and max 1.0mA. (3)Its supply voltage write at 100kHz would be typ 2.0mA and max 3.0mA. (4)Its input leakage current would be typ 0.1uA and max 3.0uA. (5)Its output leakage current would be typ 0.05uA and max 3.0uA. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!

Parameters:

Technical/Catalog Information	AT24C64N-10SI-2.7
Vendor	Atmel
Category	Integrated Circuits (ICs)
Memory Type	EEPROM
Memory Size	64K (8K x 8)
Speed	100kHz, 400kHz
Interface	I²C, 2-Wire Serial
Package / Case	8-SOIC
Packaging	Tube
Voltage - Supply	2.7 V ~ 5.5 V
Operating Temperature	-40°C ~ 85°C
Format - Memory	EEPROMs - Serial
Drawing Number	*
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	AT24C64N 10SI 2 7 AT24C64N10SI27