AT29C1024-70JC/90JC

The AT29C1024-70JC/90JC  is a 5-volt-only in-system Flash programmable and erasable read only memory (PEROM). Its 1 megabit of memory is organized as 65,536 words by 16 bits. Manufactured with Atmel's advanced nonvolatile CMOS technology, the device offers access times to 70 ns with power dissipation of just 330 mW. When AT29C1024-70JC/90JC is deselected, the CMOS standby current is less than 200 µA. The device endurance is such that any sector can typically be written to in excess of 10,000 times.

Features of the AT29C1024-70JC/90JC    are:(1)Fast Read Access Time - 70 ns; (2)5-Volt-Only Reprogramming; (3)Sector Program Operation ;Single Cycle Reprogram (Erase and Program);512 Sectors (128 words/sector);Internal Address and Data Latches for 128 Words; (4)Internal Program Control and Timer; (5)Hardware and Software Data Protection; (6)Fast Sector Program Cycle Time - 10 ms; (7)DATA Polling for End of Program Detection ; (8)Low Power Dissipation;60 mA Active Current;200 A CMOS Standby Current; (9)Typical Endurance > 10,000 Cycles; (10)Single 5V ±10% Supply; (11)CMOS and TTL Compatible Inputs and Outputs; (12)Commercial and Industrial Temperature Ranges.

The absolute maximum ratings of the AT29C1024-70JC/90JC   can be summarized as:(1)Temperature Under Bias:-55°C to +125°C; (2)Storage Temperature:-65°C to +150°C; (3)All Input Voltages(including NC Pins)with Respect to Ground :-0.6V to +6.25V; (4)All Output Voltages with Respect to Ground:-0.6V to VCC + 0.6V; (5)Voltage on OE with Respect to Ground:-0.6V to +13.5V.

If you want to know more information about AT29C1024-70JC/90JC such as the electrical characteristics ,please download the datasheet in www.seekdatasheet.com .