Purchase AT49LV8192T, In-stock AT49LV8192T From SeekIC.
Part Number: AT49LV8192T
Description: The AT49BV8192 and AT49LV8192 are 3-volt, 8-megabit Flash Memories organized as 512K words of 16 bits each. Manufacture...
- Table of contents:
AT49LV8192T
-
Suppliers
DataSheet
General Description
AT49LV8192T General Description
The AT49BV8192 and AT49LV8192 are 3-volt, 8-megabit Flash Memories organized as 512K words of 16 bits each. Manufactured with Atmel's advanced nonvolatile CMOS technology, the devices offer access times to 120 ns with power dissipation of just 67 mW at 2.7V read. When deselected, the CMOS standby current is less than 50 A.
The device contains a user-enabled "boot block" protection feature. Two versions of the feature are available: the AT49BV/LV8192 locates the boot block at lowest order addresses ("bottom boot"); the AT49BV/LV8192T locates it at highest order addresses ("top boot")
To allow for simple in-system reprogrammability, the AT49BV/LV8192 does not require high input voltages for programming. Reading data out of the device is similar to reading from an EPROM; it has standard CE, OE, and WE inputs to avoid bus contention. Reprogramming the AT49BV/LV8192 is performed by first erasing a block of data and then programming on a word-by-word basis.
The device is erased by executing the erase command sequence; the device internally controls the erase operation. The memory is divided into three blocks for erase operations. There are two 8K word parameter block sections and one sector consisting of the boot block and the main memory array block. The AT49BV/LV8192 is programmed on a word-by-word basis.
The device has the capability to protect the data in the boot block; this feature is enabled by a command sequence. Once the boot block programming lockout feature is enabled, the data in the boot block cannot be changed when input levels of 3.6 volts or less are used. The typical number of program and erase cycles is in excess of 10,000 cycles.
The optional 8K word boot block section includes a reprogramming lock out feature to provide data integrity. The boot sector is designed to contain user secure code, and when the feature is enabled, the boot sector is protected from being reprogrammed.
During a chip erase, sector erase, or word programming, the VPP pin must be at 5V ± 10%.
AT49LV8192T Maximum Ratings
Temperature Under Bias................................ -55°C to +125°C
Storage Temperature ..................................... -65°C to +150°C
All Input Voltages
(including NC Pins)
with Respect to Ground ...................................-0.6V to +6.25V
All Output Voltages
with Respect to Ground .............................-0.6V to VCC + 0.6V
Voltage on RESET
with Respect to Ground ...................................-0.6V to +13.5V
*NOTICE: Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Storage Temperature ..................................... -65°C to +150°C
All Input Voltages
(including NC Pins)
with Respect to Ground ...................................-0.6V to +6.25V
All Output Voltages
with Respect to Ground .............................-0.6V to VCC + 0.6V
Voltage on RESET
with Respect to Ground ...................................-0.6V to +13.5V
*NOTICE: Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
AT49LV8192T Features
• Low Voltage Operation
2.7V Read
5V Program/Erase
• Fast Read Access Time - 120 ns
• Internal Erase/Program Control
• Sector Architecture
One 8K Words (16K bytes) Boot Block with Programming Lockout
Two 8K Words (16K bytes) Parameter Blocks
One 488K Words (976K bytes) Main Memory Array Block
• Fast Sector Erase Time - 10 seconds
• Word-By-Word Programming - 30 ms/Word
• Hardware Data Protection
• DATA Polling For End Of Program Detection
• Low Power Dissipation
25 mA Active Current
50 A CMOS Standby Current
• Typical 10,000 Write Cycles
2.7V Read
5V Program/Erase
• Fast Read Access Time - 120 ns
• Internal Erase/Program Control
• Sector Architecture
One 8K Words (16K bytes) Boot Block with Programming Lockout
Two 8K Words (16K bytes) Parameter Blocks
One 488K Words (976K bytes) Main Memory Array Block
• Fast Sector Erase Time - 10 seconds
• Word-By-Word Programming - 30 ms/Word
• Hardware Data Protection
• DATA Polling For End Of Program Detection
• Low Power Dissipation
25 mA Active Current
50 A CMOS Standby Current
• Typical 10,000 Write Cycles
AT49LV8192T Connection Diagram
AT49LV8192T-12RC
PDF/DataSheet Download
- Datasheet: AT49LV8192T-12RC
- File Size: 152558 KB
- Manufacturer: ATMEL [ATMEL Corporation]
- Click here to Download
- ·AT403
- POSEICO [Power Semiconductors]
- PHASE CONTROL THYRISTOR
- 172778 KB
- ·AT40391B33
- System Controller
- 158891 KB
- ·AT40391B40
- System Controller
- 158891 KB
- ·AT40392-25
- Data Path Controller
- 158891 KB
- ·AT403S12
- POSEICO [Power Semiconductors]
- PHASE CONTROL THYRISTOR
- 172778 KB
- ·AT40493-25
- System Controller
- 156875 KB
- ·AT40493-50
- System Controller
- 156875 KB
- ·AT40495-25
- System Controller
- 52333 KB
AT49LV8192T Relative Products
AT49LV8192
The AT49BV8192 and AT49LV8192 are 3-volt, 8-megabit Flash Memories organized as 512K words of 16 bits each. Manufactured with Atmel's advanced nonvolatile CMOS technology, the devices offer access times to 120 ns with power dissipation of just 67 mW at 2.7V ...
AT49LV4096
The AT49BV4096 and AT49LV4096 are 3-volt, 4-megabit Flash Memories organized as 256K words of 16 bits each. Manufactured with Atmel's advanced nonvolatile CMOS technology, the devices offer access times to 120 ns with power dissipation of just 67 mW at 2.7V ...
AT49LV321T-90TI
IC FLASH MEM 3V 32M 90NS 48-TSOP
AT49LV321T-90CI
IC FLASH MEM 3V 32M 90NS 48-CBGA
-
AT49LV321T-11TI
IC FLASH MEM 3V 32M 110NS 48TSOP
-
AT49LV321T-11TC
IC FLASH MEM 3V 32M 110NS 48TSOP
Hotspot Suppliers Product
TD62783AFG
Price: 1.2-3 USD
IC DRIVER DARL SOURCE 8CH 18-SOP - TD62783AFG
MD2534-D1G-X-P
Price: 6-7 USD
IC MDOC H3, 1GB, FBGA
P0080SBL
Price: 0.0715-0.0794 USD
Protection Thyristor, DO214, 320V, 250A, surface mount solution, Low Capacitance
EPM7128SQC100-15N
Price: 8-9 USD
Programmable Logic Device, QFP-100, 175.4MHz
ULN2003AC
Price: 1-10 USD
Darlington Transistor Array, DIP, 50 V, 500 mA, ULN2003AC, Texas Instruments
OPA2134PA
Price: 2.5-3.6 USD
IC OPAMP AUDIO STER AB 8DIP - OPA2134PA
TLV320AIC10IPFB
Price: 2.62-2.94 USD
TQFP-48, general-purpose, 3V to 5.5V, 16-bit, 22-KSPS, DSP CODEC, 88 ksps, 11kHz
AD8310ARMZ-REEL7
Price: 2.8-3.3 USD
AD8310ARMZ-REEL7 IC AMP LOGARITHMIC 8MSOP
2SK134
Price: 18-22 USD
TO-3, low frequency, power amplifier, High speed switching, 7A, 14V
MC9S12XDP512MAG
Price: 9.5-12.8 USD
IC MCU, 512K flash, QFP, –0.3 to 6.0 V, 16-Bit CPU12X, Enhanced indexed addressing
SCN2681AC1N40
Price: 3-4 USD
dual asynchronous receiver/transmitter, DIP, -0.5 to +6.0 V, On-chip crystal oscillator
PEB22554HTV1.3
Price: 1-10 USD
Quad Framing and Line Interface Component, High density, generic interface, QFP, – 0.3 to 5.5 V
