AT91FR40162 General Description
The AT91FR40162 is a member of the Atmel AT91 16/32-bit Microcontroller family, which is based on the ARM7T-DMI processor core. The processor has a high-performance 32-bit RISC architecture with a high-density 16-bit instruction set and very low
power consumption.
The AT91FR40162 ARM microcontroller features 2 Mbits of on-chip SRAM and 2 Mbytes of Flash memory in a single compact 121-ball BGA package. Its high level of integration and very small footprint make the device ideal for space-constrained applications. The high-speed on-chip SRAM enables a performance of up to 74 MIPs in typical conditions with significant power reduction and EMC improvement over an external SRAM implementation.
The Flash memory may be programmed via the JTAG/ICE interface or the factory-programmed Flash Uploader using a single device supply, making the AT91FR40162 suitable for in-system programmable applications.
AT91FR40162 Features
• Incorporates the ARM7TDMI® ARM® Thumb® Processor Core
High-performance 32-bit RISC Architecture
High-density 16-bit Instruction Set
Leader in MIPS/Watt
Embedded ICE (In-circuit Emulation)
• 256K Bytes of On-chip SRAM
32-bit Data Bus, Single-clock Cycle Access
• 1024K Words 16-bit Flash Memory (2M bytes)
Single Voltage Read/Write,
Sector Erase Architecture
Dual-plane Organization Allows Concurrent Read and Program/Erase
Erase Suspend Capability
Low-power Operation
Data Polling, Toggle Bit and Ready/Busy End of Program Cycle Detection
Reset Input for Device Initialization
Sector Program Unlock Command
128-bit Protection Register
Factory-programmed AT91 Flash Uploader Software
• Fully Programmable External Bus Interface (EBI)
Up to 8 Chip Selects, Maximum External Address Space of 64M Bytes
Software Programmable 8/16-bit External Data Bus
• 8-level Priority, Individually Maskable, Vectored Interrupt Controller
4 External Interrupts, Including a High-priority Low-latency Interrupt Request
• 32 Programmable I/O Lines
• 3-channel 16-bit Timer/Counter
3 External Clock Inputs, 2 Multi-purpose I/O Pins per Channel
• 2 USARTs
2 Dedicated Peripheral Data Controller (PDC) Channels per USART
• Programmable Watchdog Timer
• Advanced Power-saving Features
CPU and Peripherals Can be De-activated Individually
• Fully Static Operation:
0 Hz to 75 MHz Internal Frequency Range at VDDCORE = 1.8V, 85°C
• 2.7V to 3.6V I/O Operating Range, 1.65V to 1.95V Core Operating Range
• -40°C to 85°C Temperature Range
• Available in a 121-ball 10 x 10 x 1.2 mm BGA Package with 0.8 mm Ball Pitch

- ·AT9
-
- Analog IC
- 55024 KB

- ·AT90-0001
- MACOM [Tyco Electronics]
- Digital Attenuator, 31.0 dB, 5-Bit, TTL Driver, DC-6.0 GHz
- 244970 KB

- ·AT90-0001-TB
- MACOM [Tyco Electronics]
- Digital Attenuator, 31.0 dB, 5-Bit, TTL Driver, DC-6.0 GHz
- 244970 KB

- ·AT90-0001TR
- MACOM [Tyco Electronics]
- Digital Attenuator, 31.0 dB, 5-Bit, TTL Driver, DC-6.0 GHz
- 244970 KB

- ·AT9001
- Advanced Semiconductor
- SILICON VARACTOR DIODE
- 25201 KB

- ·AT90-0106
- MACOM [Tyco Electronics]
- Digital Attenuator, 50 dB, 6-Bit, TTL Driver, DC-2.4 GHz
- 285857 KB

- ·AT90-0106-TB
- MACOM [Tyco Electronics]
- Digital Attenuator, 50 dB, 6-Bit, TTL Driver, DC-2.4 GHz
- 285857 KB

- ·AT90-0106TR
- MACOM [Tyco Electronics]
- Digital Attenuator, 50 dB, 6-Bit, TTL Driver, DC-2.4 GHz
- 285857 KB

Map list: ABCDEFGHIJKLMNOPQRSTUVWXYZ 0123456789All