Am29F200AT-90DPC

The Am29F200AT-90DPC is a 2 Mbit, 5.0 Volt-only Flash memory organized as 262,144 bytes or 131,072 words. The 8 bits of data appear on DQ0DQ7; the 16 bits on DQ0DQ15. The Am29F200A is offered in 44-pin SO and 48-pin TSOP pack-ages. This device is designed to be programmed in-system with the standard system 5.0 volt VCC supply. A 12.0 volt VPP is not required for program or erase operations. The device can also be reprogrammed in standard EPROM programmers. The standard device offers access times of 55, 70,90, 120, and 150 ns, allowing operation of high-speed micro-processors without wait states. To eliminate bus contention the device has separate chip enable (CE#), write enable (WE#) and output enable (OE#) controls. The device requires only a single 5.0 volt power supply for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations.

The following is about the maximum ratings of Am29F200AT-90DPC: (1)Storage Temperature Plastic Packages: 65°C to +150°C; (2)Ambient Temperature with Power Applied: 55°C to +125°C; (3)Voltage with Respect to Ground VCC: 2.0 V to +7.0 V; (4)A9, OE#, and RESET#: 2.0 V to +12.5 V; (5)All other pins: 0.5 V to +7.0 V; (6)Output Short Circuit Current: 200 mA.