Am41PDS3224DT10I

The Am41PDS3224DT10I is designed as a 32Mbit, 1.8V-only flash memory organized as 2,097,152 words of 16 bits each. The device is designed to be programmed in system with standard system 1.8V Vcc supply. This device can also be reprogrammed in standard EPROM programmers.

It has four features about Am41PDS3224DT10I's performance. (1)High performance which means random access time of 100ns at 1.8V to 2.2V Vcc. (2)Ultra low power consumption (typical values) which means 2.5mA active read current at 1MHz for initial page read, 24mA active read current at 10MHz for initial page read, 0.5mA active read current at 10 MHz for intra-page read, 1mA active read current at 20MHz for intra-page read and 200nA in standby or automatic sleep mode. (3)Minimum 1 million write cycles guaranteed per sector. (4)20 year data retention at 125°C which means reliable operation for the life of the system. That are all the main features.

Some absolute maximum ratings of Am41PDS3224DT10I have been concluded into several points as follow. (1)Its storage temperature plastic packages would be from -55°C to +125°C. (2)Its ambient temperature with power applied would be from -40°C to +85°C. (3)Its voltage with respect to ground would be from -0.3V to +2.5V for Vccf /Vccs and would be from -0.5V to +11V for RESET# and would be from -0.5V for 10.5V for WP#/ACC and would be from -0.5V to Vcc+0.5V. (4)Its output short circuit current would be 100mA. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some flash DC characteristics of Am41PDS3224DT10I are concluded as follow. (1)Its input load current would be max 1.0uA. (2)Its RESET# input load current would be max 35uA. (3)Its output leakage current would be max 1.0uA. (4)Its ACC input leakage current would be max 35uA. (5)Its flash Vcc standby current would be typ 0.2uA and max 5uA. (6)Its flash Vcc reset current would be typ 0.1uA and max 5uA. (7)Its flash Vcc active read-while-program current would be typ 30mA and max 55mA. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!