BDG1A

Features: Pin-equivalent to the general-trade 26LS31 devic with improved speed, reduced power consumptio and significantly lower levels of EMI Four line drivers per package Meets ESDI standards 2.0 ns maximum propagation delay Single 5.0 V ± 10% supply Operating temperature range: -40 °C to +125 °...

product image

BDG1A Picture
SeekIC No. : 004299170 Detail

BDG1A: Features: Pin-equivalent to the general-trade 26LS31 devic with improved speed, reduced power consumptio and significantly lower levels of EMI Four line drivers per package Meets ESDI standards 2.0 ...

floor Price/Ceiling Price

Part Number:
BDG1A
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/3/28

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

 Pin-equivalent to the general-trade 26LS31 devic with improved speed, reduced power consumptio and significantly lower levels of EMI Four line drivers per package Meets ESDI standards 2.0 ns maximum propagation delay Single 5.0 V ± 10% supply Operating temperature range: -40 °C to +125 °C (wider than the 41 Series) 400 Mbits/s maximum data rate Logic to convert TTL input logic levels to differen tial, pseudo-ECL output logic levels No line loading when VCC = 0 (BDG1A, BDP1A  only) High output driver for 50 ? loads <0.2 ns output skew (typical) On-chip 220 ? loads available Third-state outputs available Surge-protection to ±60 V for 10 ms available (BPNGA, BPNPA, BPPGA) Available in four package types ESD performance better than the 41 Series Lower power requirement than the 41 series


Pinout

  Connection Diagram


Specifications

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.

Parameter Symbol Min Max Unit
Power Supply Voltage VCC - 6.5 V
Ambient Operating Temperature TA -40 125 °C
Storage Temperature Tstg -55 150 °C



Description

The BDG1A are TTL input-to-pseudo-ECL-differential-output used for digital data transmission over balanced transmission lines. All devices in this family have four drivers with a single enable control in a common package. These drivers are compatible with many receivers, including the Lucent Technologies Microelectronics Group 41 Series receivers and transceivers. They are pin equivalent to the general-trade 26LS31, but offer increased speed, decreased power consumption, and significantly lower levels of electromagnetic interference (EMI). They replace the Lucent 41 Series drivers.


The BDG1A device is the generic driver in this family and requires the user to supply external resistors on the circuit board for impedance matching.


The BDGLA is a low-power version of the BDG1A, reducing the power requirement by more than one half. The BDGLA features a 3-state output with a typical third-state level of 0.2 V.


The BDP1A is equivalent to the BDG1A but has 220 ? termination resistors to ground on each driver output. This eliminates the need for external pulldown resistors when driving a 100 ? impedance line.


The BPNGA and BPNPA are equivalent to the BDG1A and BDP1A, respectively, except that a lightning protection circuit has been added to the driver
outputs. This circuit will absorb large transitions on the transmission lines without destroying the device.


The BPPGA combines the features of the BPNGA and BPNPA. Two of the gates have their outputs terminated to round through 220 ? resistors while the two remaining gates require external termination resistors.


When the BDG1A and the BDP1A devices are powered down, the output circuit appears as an open circuit relative to the power supplies; hence, they will not load the transmission line. For those circuits with termination resistors, the line will remain impedance matched when the circuit is powered down. The BPNGA, BPNPA, BPPGA, and BDGLA will load the transmission line, because of the protection circuit, when the circuit is powered down.


The packaging options that are available for these quad differential line drivers include a 16-pin DIP; a 16-pin, J-lead SOJ; a 16-pin, gull-wing SOIC; and a 16-pin, narrow-body, gull-wing SOIC.


Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Connectors, Interconnects
Optical Inspection Equipment
Static Control, ESD, Clean Room Products
Test Equipment
View more